Fan Shroud 24" 289/302 with A/C 1968/302/351 1969

CJ's Part Number: FANS6
MSRP: $82.99
CJ's Low Price:
1508716800 14808
Earn 77 RPM Points What's this?
Fan Shroud 24" 289/302 with A/C 1968/302/351 1969

Product Description

24" Fan Shroud for 1968 Mustangs with a 289 or 302 with A/C and 1969 Mustangs with a 302 or 351 Engine.

This replacement fan shroud fits small block engines and works with radiators where the outlet is on the passenger side. Also fits the Boss 302 model. Made of molded plastic from original Ford Tooling for the best fitment.

-Depth: 2-1/4"
-Width: 25-5/16"
-Height: 19-3/4"

*A 24" radiator was typically found on cars with air conditioning or special models like the Boss."

Similar Mustang Parts

similar Mustang parts More Fans & Fan Shrouds  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
Fan Shroud 24" 289/302 with A/C 1968/302/351 1969 is rated 4.3 out of 5 by 3.
Rated 5 out of 5 by from Fits like a glove on my 1967 with a 351W and AC After years of not having a shroud I finally found one that fit the bill perfectly. I installed one of these on my 1967 fastback w/ AC and it looks like an oem piece. I was worried that I would have to go back to the sorry little solid 4 blade fan but I was able to still use my factory 7 blade factory FoMoCo flex fan I pulled from a 1977 LTD with the heavy duty cooling package. Now with this shroud even with AC condenser in front of my radiator, I can idle in the Florida heat with the AC cranking and never get above 190º. For the record, I do have a factory style brass 4 core, 24" radiator and the gasket that mounts to the radiator support as well.
Date published: 2016-03-03
Rated 5 out of 5 by from Customer Care The customer care aspect comes into play because a CJ Pony Parts (CJPP) representative surprised me with a telephone call. At the time, the shroud was going to be significantly delayed and CJPP wanted to advise me of same and if I wanted too cancel the transaction. I was in no rush to receive the shroud, so I opted to accept the delay. As it turned out the actual delay was significantly shorter than expected. I figure the staff went out of their way to keep this customer up to date on the requisitions' status. Good on ya! I can't recall many instances, if any, where a vendor has taken the time to do so. Charlie Schlund
Date published: 2016-06-29
Rated 3 out of 5 by from Average Overall size and shape are ok but this piece is nowhere near the quality of the original FoMoCo shroud. The material is much thinner and it is stamped with the phrase "Made in Taiwan" which did not appear on the original so I doubt it was made using original Ford tooling as it is advertised to be.
Date published: 2017-03-02
  • y_2017, m_10, d_21, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_FANS6, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 21.27ms

Product Questions

what are the mounting notch dimensions to mount to the radiator...IE..distance between the mounting notches...regards....Doug

Asked by: mustang doug wisconsin
We don't have the dimensions listed but it is the exact size as original and fits the 24" factory radiator for 1968/1969.
Answered by: Rick CJs
Date published: 2016-12-06

What diameter is the opening in the shroud? 

Asked by: paul1
I need to know what the opening diamiter is last was 19", Im hopeing this is the same.....
Answered by: mp3pirate
Date published: 2015-08-17

will the FANS6 fan shroud work with radiator kit RADK5?

Asked by: 65falcon
It should work.
Answered by: CJ Pony Parts
Date published: 2015-03-16
  • y_2017, m_10, d_21, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_FANS6, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 5.83ms

You Might Also Like