Fel-Pro Cylinder Head Gasket Performance 1011-1 260/289/302/351W 1965-1995

FEL-PRO 10111
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 115.85ms
  • bvseo-msg: HTTP status code of 404 was returned;


  • 4.100" Gasket Bore
  • .041" Compressed Thickness
  • Steel Core Laminate Design
  • Sold Individually
MSRP $52.99
You save 25%

Fel-Pro 1011-1 Performance Head Gasket for 1965-1995 Mustangs with a small block Ford engine*. Sold individually.

*A small block Ford engine refers to 260/289/302/351W engines.

Fel-Pro performance head gaskets feature a PermaTorque/blue gasket body with a solid-steel core to minimize torque loss and gasket blowout. Fel-Pro performance head gaskets also have a wire-ring combustion seat with stainless steel "armor" for extra sealing force around combustion chambers. Made with a pre-flattened steel-wire ring, Fel-Pro performance head gaskets have the strength of steel-wire sealing, and the minimum brinelling of aluminum heads.

Gasket Bore: 4.100"
Compressed Thickness: .041"
Compressed Volume: 8.5cc
Construction: Steel core laminate
Combustion Seal: Pre-flattened steel wire

Installation Difficulty


Advanced skill is required for this installation.

Vehicle Fitment

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.53ms
  • bvseo-msg: HTTP status code of 404 was returned;

Is this the hi po gasket for the 70 Boss 302? Marty

Asked by: Boss70cool
No it is not.
Answered by: rk cjpp
Date published: 2019-04-12

Can this head gasket be used with aluminum cylinder heads

Asked by: Sn95_351
Yes they could but you should check the head manufacturers recommendations.
Answered by: rk cjpp
Date published: 2019-03-04

Do these come as a set or separate? And will these work with the Edelbrock E-Street heads?

Asked by: IainMack
These come as a single headgasket. I would suggest contacting Edelbrock for information regarding head gaskets. Have the head part number ready.
Answered by: rk cjpp
Date published: 2018-11-07

hi , I have 1 Fel pro with nr. 1011-2 is this the same gasket? I need one more.

Asked by: AllanLJ
Here is the link to the correct gasket.https://www.cjponyparts.com/fel-pro-cylinder-head-gasket-performance-1011-2-260-289-302-351w-1965-1995/p/HG10112/
Answered by: rk cjpp
Date published: 2018-03-20

Hello,   I have engine which is marked 351 WCP14 on cylinders (and D4AE-6015-AA-14 on block). It should be Windsor from 1974, but I am not 100% sure. Can you please tell me if the gaskets will be ok, or do you have gaskets set with Edelbrock manifold?

Asked by: Kovalski
Those gaskets should fit your application.
Answered by: rk cjpp
Date published: 2016-10-14
  • y_2019, m_11, d_10, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_HG10111, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 139.61ms