Fender Flare Kit Unpainted 1965-1966

CJ's Part Number:
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 43.48ms
  • bvseo-msg: HTTP status code of 404 was returned;


  • Add 1.5" Front/2.5" Rear Cover
  • Light Weight Fiberglass
  • Gel Coat Finish
  • USA Made

Unpainted Fender Flare Kit for all 1965-1966 Mustangs.

These flares are designed to work with the stock body panels. They extend to the bottom edge of the car, rolling slightly underneath it, for a complete look and ease of installation.

The front flares provide an additional 1-1/2" of tire width and the rears provide 2-1/2".

A heavy-duty grey Gelcoat primer finish provides extra durability and makes paint prep simple. Will require prepping, priming and painting prior to installation.

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 5.41ms
  • bvseo-msg: HTTP status code of 404 was returned;

are they made to fiberglass on to the steel fenders and quarter panels?

Asked by: louie douie
They are fiberglass.
Answered by: CJPP Dave
Date published: 2018-01-23

Are these metal?

Asked by: lizzz23
No, they are Fiberglass.
Answered by: CJPP Dave
Date published: 2016-03-30

Hi I'm interested in the fender flares, my question is how do they mount? Are there studs protruding on the backside, or are they mold on?

Asked by: Frdboy1979
There is no studs. You would have to mold them on with panel bond or another form of adhesive. I'm sure they could be mechanically attached, but they come with no provisions for that.
Answered by: CJPP Dave
Date published: 2018-11-11

How big of a tire can i fit on the rear without them rubbing with these flares?

Asked by: Jesse H
That's a little hard to say. You won't be limited too much by the flares, but other items on your Mustang might be limiting. Once you install them, we'd suggest that you simply measure everything and take it from there.
Answered by: CJ Pony Parts
Date published: 2017-03-07

Will this fender kit fit with CJ 's Part Number: FSA13 " front bumper "?? or can I get it to fit together??

Asked by: Anonymous
I think you'll run into problems with FSA13 and this kit - FSA13 extends to the wheel openings, so getting the fender flares to fit will be very problematic on the front and would require some modification.
Answered by: CJ Pony Parts
Date published: 2017-03-07
  • y_2019, m_10, d_19, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_GEK28, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 32.48ms