Flaming River Electric Power Steering Kit Microsteer With Speed Sensor

These steering kits provide electric power assistance to a full variety of classic cars. Designed by Flaming River, the Microsteer system (FR40200KT) can be adapted without changing the steering linkage or rack-and-pinion setup already on your Mustang.

Features and Benefits:
- Electric Power Assisted Steering
- Universal Application
- Quality Construction
- Premium Materials

Flaming River is now offering Microsteer universal Electric Power Assisted Steering system. It can be easily fitted to virtually any vehicle, without the need to change the steering rack or fit a hydraulic system where manual steering currently exists.

The unique Microsteer Tuning Box allows you to adjust the amount of assistance by using a rotary potentiometer or, if you prefer, you can make the system speed sensitive by connecting a wheel speed signal to the Tuning Box. A mode selection switch on the box allows you to choose your preferred method, manual or wheel speed.

If you have no wheel speed sensor on the vehicle, we recommend purchasing a Hall effect type sensor. This is not included in the kit and would need to be purchased separately. The input and output shafts of the Microsteer unit are 11/16”-36.

Please Note: Flaming River recommends a specific U-Joint/Coupler, depending on your application. Ensure you have the right joints and couplers for your installation.

This Kit Includes:
- Motor/Gearbox (MGU)
- Electronic Control Unit (ECU)
- Tuning Box
- Wiring Harness
- FR40200S Speed Sensor

Specifications:
- Operating Voltage - Nominal 13.8V DC
- Maximum Current Draw - 30 Amps
- Average Current Draw - Less than 2 Amps
- System Weight MGU & ECU - 9.70lbs/4.4kg
- Maximum Torque Output - 32Nm/24lb.ft
- IP Rating - IP67
- -20 to 120C/-4 to 248F Operating Temperature
- Motor Rated Power - 220 Watts
- MGU Spline Pattern - 11/16"-36 Both Ends

Applications:
1965-1973 Mustang
1948-1979 F100
1966-1977 Bronco
1960-1987 C10