Flowmaster Axle-Back Exhaust System 2-1/2" Force II Dual Exit Stainless Steel Jeep Wrangler JK 2012-2018
Flowmaster 2-1/2" Stainless Steel Dual Exit Force II Axle-Back Exhaust System for 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.
Receive Flowmaster power and performance benefits while adding a moderate exterior exhaust tone and a mild interior note with this 2-1/2" Stainless Steel Dual Exit Force II Axle-Back Exhaust System for your 2012-2018 Jeep Wrangler JK!
Features and Benefits of the Flowmaster 2-1/2" Stainless Steel Dual Exit Force II Axle-Back Exhaust System (817729):
- Stainless steel construction
- Bold black color
- 3-1/2" polished tips
- Mandrel-bent tubing
- Moderate performance tone
- Dual exit tailpipes
- Proudly manufactured in the USA
- Includes all required hardware
- Simple bolt-on installation
- Fits ALL 2012-2018 Jeep Wrangler JKs
Flowmaster's Force II axle-back exhaust system for the 2012-2018 JK is perfect for the person looking for a moderate exterior and mild interior exhaust tone. This bolt-on DOR (dual out rear) emissions-legal system for the 3.6L V6 features a stainless steel 80 Series crossflow muffler and dual 2-1/2" mandrel bent tailpipes. The system finishes with 3-1/2" polished stainless steel tips. It is manufactured in the USA and is designed for an easy fit. This exhaust kit includes all of the necessary parts and hardware for a straightforward installation.
Flowmaster is a manufacturer of a wide variety of premium exhaust components, from full exhaust systems and exhaust kits, to mufflers and accessories. Flowmaster is widely known for its distinctive 'Flowmaster sound,' which is available in mild, moderate and aggressive tones.
Order Flowmaster's 817729 2-1/2" Stainless Steel Dual Exit Force II Axle-Back Exhaust System for your 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Novice skill is required for this installation.
This Flowmaster Force 2 Axle-Back Exhaust is made of stainless steel, mandrel bent tubing, with a baffled muffler, and polished tips. It's going to be a direct fit replacement for the factory muffler. And give your Jeep a nice tone, and a custom look. It's preassembled, so it'll be super easy to install. Today we're going to install it, using our 2016 Jeep Wrangler.
This axle-back exhaust is going to be super easy to install. There's only one 15 mm nut holding it on. Then you just have to remove the muffler from the two rubber hangers. Remove the 15 mm nut on the exhaust clamp. Now, we're going to remove this bracket from the rubber hanger on the Jeep. All right, now we can move to the other hanger. Once both hangers are disconnected, grab onto the muffler, and twist it to break it loose from the pipe, then you can pull it off.
First thing we're going to do with the factory exhaust out of the way, is install the provided clamp on the over-axle pipe. Place the passenger side rubber hanger on the passenger side of the muffler. Then install the driver side end to the rubber hanger, then to the over-axle pipe. Then, tighten the clamp. Tighten the clamp with a 15 mm socket. And your installation's finished.
Our Flowmaster Force 2 Axle-Back Exhaust is installed. It looks really good. I love the dual tip design on this Jeep. It sounds pretty good too, and it's not too loud. Installation will take you about 30 minutes. And before you know it, you'll be heading off-road.