Flowmaster Axle-Back Exhaust System 2-1/2" Force II Single Exit Stainless Steel Jeep Wrangler JK 2012-2018

Flowmaster:
817693
MSRP $445.00
$399.95
You save 10%

Flowmaster 2-1/2" Stainless Steel Single Exit Force II Axle-Back Exhaust System for 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.

Enhance your 2012-2018 Jeep JK Wrangler's throttle response, add horsepower and improve fuel mileage with this 2-1/2" Stainless Steel Single Exit Force II Axle-Back Exhaust System from Flowmaster. This exhaust is perfect for those looking for a moderate exterior and mild interior exhaust tone!

Features and Benefits of the Flowmaster 2-1/2" Stainless Steel Single Exit Force II Axle-Back Exhaust System (817693):
- Stainless steel construction
- Mandrel bent tubing
- 3" tip with brushed finish
- Moderate exterior sound
- Mild interior sound
- Dyno tuned for maximum performance
- Improves throttle response, power and fuel efficiency
- Made in the USA
- Includes required parts and hardware
- Simple installation
- Fits ALL 2012-2018 Jeep Wrangler JKs

This bolt-on SOR (single out rear) emissions-legal system for the 3.6L V6 features a stainless steel Super 50 muffler and a single 2-1/2" stainless steel mandrel bent tailpipe. The system finishes with a 3" brushed stainless steel tip. It is proudly manufactured in the USA and designed for an easy fit. All of the necessary parts and hardware required for installation are included.

This mild sounding system is designed to replace your JK's original rear mounted muffler located behind the rear axle using factory style connections. With easy fit in mind, this exhaust kit is mandrel bent for maximum performance and includes specially selected mufflers and all the necessary parts and hardware for a simple installation.

The Force II exhaust system delivers a moderate exterior tone and moderate to mild interior tone. It's suited for customers looking for efficiency improvements without a lot of noise. The benefits of utilizing this axle-back exhaust include improved throttle response, power and mileage.

Flowmaster is a manufacturer of a wide variety of premium exhaust components, from full exhaust systems and exhaust kits, to mufflers and accessories. Flowmaster is widely known for its distinctive 'Flowmaster sound,' which is available in mild, moderate and aggressive tones.

Order Flowmaster's 817693 2-1/2" Stainless Steel Single Exit Force II Axle-Back Exhaust System for your 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

Freddy: Today we are going to be installing this Flowmaster Force Two axle-back exhaust on our 2016 Jeep Wrangler. I have special guest Jeremy from Flowmaster. Jeremy, what can you tell me about this axle-back?

Jeremy: Well, thanks Freddy. This is our Force Two system, fits 2012 up to 17, 2 and 4 door. With this system, really you could install it on the ground if you wanted to. If you are doing it at home on your driveway, throw it on, 30 minutes an hour you're ready to go.

Freddy: Awesome, lets get to the installation.

Tools you'll need for this installation: half-inch ratchet, 15 millimeter socket, 3/8 ratchet, 10 millimeter socket, and you'll probably need an exhaust hanger removal tool.

So we got the Jeep up in the air. We're about to remove the factory system. Jeremy, what's the first thing I should do?

Jeremy: Yeah, thanks Freddy. You know, this is kind of what I was talking about before. This is ugly, we want that out of there. I'm sure it weighs a ton as well. You know, it's important to know too, that it's great we've got a lift for this, makes it pretty convenient. But if you're a do it yourselfer at home in your driveway, literally you can lay underneath this thing and take it off. Especially if you've got a lift, or lift-kit of a Jeep, makes it so simple.

And this is a great kit. It fits the 12 and 17 JKs, the 2 and the 4 door. So that works there. We start off, there's a clamp right here. We remove that, you take it out of the hangers, we put the new one on.

Simple as that.

Freddy: Sounds simple.

Remove the nut right here on this clamp with a 15 millimeter socket.

You can remove this rubber hanger from either the muffler bracket or the chasse bracket. But it looks like it's going to be easier to remove it from the chasse bracket cause it's a little bit shorter.

Then remove the driver's side rubber hanger from the muffler bracket.

Then twist and pull off the muffler.

With the factory system out of the way, the first thing we are going to do is put this clamp over the over-axle pipe.

Then get the muffler into the rubber hanger, then into the over-axle pipe.

Put the passenger side hanger over the tail pipe, then install the clamp over the muffler.

Insert the tail pipe into the muffler. Then hang it to the frame bracket.

Tighten both clamps with a 15 millimeter socket.

And your installation is finished.

All right let's hear it.

Our Flowmaster Force Two axle-back exhaust is installed. Jeremy, is there anything you'd like to add?

Jeremy: Great work on this Freddy. Thanks for having me out. You know, this Jeep sounds a lot better, it's going to perform better. We've been known for street performance and race mufflers for years but we're excited to be in the off road market. Giving better performance and sound to Jeep owners. Best part is, made in the US.

Freddy: Awesome. This exhaust along with other Flowmaster exhausts can be found for you JK Wrangler at CJPonyParts.com.

Vehicle Fitment

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.