Flowtech Long Tube Headers Ceramic With 1-1/2" Primaries 260/289/302 1965-1973

Flowtech:
32102FLT
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 124.62ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Highlights

  • 1-1/2" Primaries
  • 5/16" Machined Flange
  • Mandrel Bent 16 Gauge Tubes
  • Ceramic Coated Finish
MSRP $395.95
$355.95
You save 10%

Flowtech Ceramic Long Tube Headers with 1-1/2" Primaries for all 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a 260, 289 or 302 Engine.

Unlock the full potential of your classic 1965-1973 Mustang’s 260, 289 or 302 engine with these Flowtech 32102FLT Ceramic Long Tube Headers with 1-1/2" Primaries. These replacement long tube headers are designed, engineered and tested to ensure you’re getting the maximum performance and economy out of your pony’s engine.

Features and Benefits:
- Leak tested for max performance
- Ceramic coating on headers
- 1-1/2” primaries and 3” collectors
- Rust and corrosion resistance
- Mandrel-formed power plenum
- Leak-proof O-ringed port seals
- Includes all mounting hardware and gaskets

Each of these long tube headers are formed from specially selected .049 cold roll flash controlled tubing while featuring Flowtech's exclusive, thick, mandrel-formed 3” power plenum collectors. All ports are precisely fitted and finished with sturdy, leak-proof O-ringed port seals. To ensure a long life for your new long tube headers they are developed to be both rust and corrosion resistant. These Flowtech long tube headers are accompanied by all the required mounting hardware, including bolts, nuts and premium gaskets, to make the installation process as smooth as possible.

Please Note: The use of header wrap is not recommended as it can cause the header tubes to crack or rust due to excessive heat and moisture build-up.

*A custom made intermediate pipe/h-pipe is required. Flowtech recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid damaging the ceramic coating.

When it comes to headers, you can pay big dollars for big names or you can go with a quality product from Flowtech. CJ Pony Parts offers numerous Flowtech headers for classic Mustangs, each one is reasonably priced, yet very high quality, leaving you no choice on where to get the biggest bang for your buck!

Order these Flowtech 32102FLT Ceramic Long Tube Headers with 1-1/2" Primaries for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang with a 260, 289 or 302 Engine today from CJ Pony Parts.

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.27ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

I have a 1966 mustang with 289 with power steering as of right now still have stock auto transmission but plan on converting to t5 trans in the future will these headers work with no mods required?

Asked by: Browning66289
They will only work with a t-5 conversion if you use a hydraulic clutch release. I would suggest shorty headers.
Answered by: rk cjpp
Date published: 2019-06-21
  • y_2019, m_12, d_13, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_EXHD90, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 112.19ms
  • QUESTIONS, PRODUCT