Fog Light Bezel And Mounting Kit With KC HiLiTES Flex LED Lights And Rigid Industries LED Radiance Pod Lights With Amber Backlights F-150 Raptor 2017-2020

CJ's Part Number:
RFLK10
Rating:
80% of 100
MSRP $867.94
$822.49
You save $45.45

Fog Light Bezel and Mounting Kit with a Pair of KC HiLiTES Flex LED Lights and Rigid Industries LED Radiance Pod Lights with Amber Backlights for 2017, 2018, 2019 and 2020 F-150 Raptors.

This durable and stylish Fog Light Bezel and Mounting Kit will give your 2017-2020 Raptor F-150 a premium LED upgrade. It includes four Rigid Industries LED Radiance Pod Lights with Amber Backlights and two KC HiLiTES Flex LED Lights for the ultimate in off-road lighting!

Kit Includes:
- Pair (2) Stainless Steel Black Powder Coated Fog Light Mounts
- Paintable Molded ABS Bezels
- Stainless Steel Mounting Hardware
- Pair (2) Silicone Gaskets
- Two Pairs (4) Rigid Industries Radiance Spot Light Pods with Amber Backlights (20204)
- One Pair (2) KC HiLiTES Flex LED Lights with Black Bezel Ring and Spread/Flood Beam Pattern

The fog light mounting kit is crafted from black powder coated stainless steel, providing a durable and long lasting finish. This kit includes a pair of paintable, UV stable ABS fog light bezels which are designed to install into the factory bumper cut out. All of the supplied hardware is stainless steel. It won't corrode or rust over time. The silicone gaskets are designed to protect and seal the fog light cut out.

Features and Benefits of the Pair of Rigid Industries LED Radiance Pod Lights with Backlights:
- High-Grade Aluminum Construction
- 9-15 V DC
- Alloy Housing and Heatsink
- Dedicated Wire to Run Backlighting without Primary LEDs
- Back-Lighting Independently Controlled
- IP68 Compliant ­ Dust / Water Ingress
- High Impact Polycarbonate Lenses
- GORE® Pressure Equalizing Vent
- Black Exposed Printed Circuit Board
- D-Series® Construction And Durability

The Rigid Industries Radiance Pod is the ultimate solution for those looking for Rigid's legendary quality at a level everyone can attain. The Radiance Pod is built with the same high-grade aluminum alloy housing as the legendary D-Series, but that¹s where the visual similarities end. Inside, the Rigid Industries Radiance Pod is feature-packed, with a black exposed printed circuit board, forward projecting optics that optimize the light output and amber back-lighting!

Please Note: This kit does not include a wiring harness. We highly recommend LEDWH4 wiring harness to go along with this fog light kit. LEDWH4 harness allows for an easy connection of your 6 new lights to the factory Raptor AUX switches.

Tech Tip: The smaller third light in this kit must be the supplied KC HiLiTES Flex LED.

*When using RIGID dually light covers, the cover can only be removed by removing light from the bezel.

Serious off-road enthusiasts know that the F-150 SVT Raptor has specialized all-terrain and powertrain components, which make it the pickup to own when you want to traverse sand, mud and intense terrains, at very high velocities. Get the most out of your new Raptor F-150 with high-quality performance and off-road upgrades today!

California Residents: Proposition 65 Warning

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

We're going to show you how to improve your Raptor's nighttime visibility and give it a more finished look.

The F150 Raptor came from the factory with a great set of LED headlights. But for some reason, it didn't come with fog lights. So today we're going to change that on our Raptor, with this LED fog light kit. This Fog light kit is designed to fit your 2017 to 2018 F150 Raptor.

It comes with two heavy duty steel brackets that bolt directly to the front bumper and mount a KC flex LED into Rigid Industries Amber Radiance Pod Lights on each side. Black bezels are also included to fill the hole in the bumper to give truck a more finished look. For more information and pricing click the link in the description down below.

Now let's get to the install. Tools you'll need for this installation, 1/4" ratchet, 10mm socket and extension, 3/8" ratchet. 13mm socket, 5mm hex key, 13mm wrench, 17mm wrench and basic wiring tools.

Okay we're going to be working on the driver's side of the truck so we're going to be working with our driver side bracket. They are site specific. The first thing I want to do if it doesn't come with them pre-installed is install these U-clips right here onto the bracket. And then we're going to install the bezels. These bezels are site specific also they're labeled D for driver and P for passenger side. You're just going to clip them in to the bracket, push them in like that, get them to lock in place.

Okay, we're ready to install the lights now. Okay to install the lights and to make sure they are spaced perfectly for the bracket, it does come with hardware and instructions to properly space them. Install the bolt, and for these rigid lights, you're going to install the thick washer, the spacer and then the thin washer and put that onto the bracket. Then on the backside use a thin washer and nut. And do the same thing for the other rigid light.

Then with this KC light you just want to use one of the thin spacers to space it out. Then use the KC hardware to secure it, and then tighten everything down. These rigid lights can be tightened with a 13mm socket and wrench. Tighten the KC light with a 17mm wrench. This can now be installed onto the truck. The kit comes with this rubber seal that you put around the edge of the bumper right here to protect the bracket from scratches. Okay our fog lights can now be installed.

To install this fog light bracket we're going to be working with two factory holes in the bumper. One here and one here. Now for this hole you don't need to drill it out but it will make it a lot easier if you can drill the hole out or file it out just to make it a little bit bigger. To install the bracket just lift it up get it behind this plate and install the innermost bolt first. Once you get the bolt started do not tighten it all the way, get the next bolt in and then you can tighten both of them. Okay, now just repeat the same process for the other side of the bumper then you can move on to wiring.

To make wiring up these lights a lot easier we do recommend purchasing the wiring harness that we offer. It comes with three connectors on each side to plug into all three lights. Then it has this purple wire and this will operate the back lights on the amber LED's. We're going to hook this wiring harness up to our auxiliary switches right here so it will work with the factory Raptor switches.

So these are the factory wires for the Raptor switches, they're located right in this area and they might be covered with some loom. Okay so these are the factory wires for the Raptor auxiliary switches they're located right in this area but they might be covered with some loom. This is where we're going to run our red power wire and our purple wire to. You can run them to whichever switch that you want. We're going to pull the wiring harness up from the bottom, right near the battery and then we'll connect it to both sides of the bumper. Once you wire up the harness the way you want, pull it along the bottom of the bumper and plug in all your lights.

Okay so we've got our LED fog light kit installed in our Raptor and I have to say I love the way they look. The amber back-light really adds a killer look at night and it's going to add a lot of visibility when you're on the trail too. Installing is really not that bad, should take you about two, two and a half hours and before you know it you'll be heading off road.

Vehicle Fitment

This product will fit the following F-150 years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.