Fog Light Bezel And Mounting Kit With KC HiLiTES Flex LED Lights F-150 Raptor 2017-2018

CJ's Part Number: LBMB33
CJ's Low Price:
$524.00
1508544000 72901
Be sure to grab these additional accessories for your truck!
CJ's Low Price:
$49.00
Qty
CJ's Low Price:
$10.99
Qty
Earn 524 RPM Points What's this?
Fog Light Bezel And Mounting Kit With KC HiLiTES Flex LED Lights F-150 Raptor 2017-2018
Fog Light Bezel And Mounting Kit With KC HiLiTES Flex LED Lights F-150 Raptor 2017-2018 Fog Light Bezel And Mounting Kit With KC HiLiTES Flex LED Lights F-150 Raptor 2017-2018 Fog Light Bezel And Mounting Kit With KC HiLiTES Flex LED Lights F-150 Raptor 2017-2018 Fog Light Bezel And Mounting Kit With KC HiLiTES Flex LED Lights F-150 Raptor 2017-2018 Play Fog Light Bezel And Mounting Kit With KC HiLiTES Flex LED Lights F-150 Raptor 2017-2018 Video 1 Play Fog Light Bezel And Mounting Kit With KC HiLiTES Flex LED Lights F-150 Raptor 2017-2018 Video 2

Product Description

Fog Light Bezel and Mounting Kit with a Pair of KC HiLiTES Flex LED Lights for 2017-2018 Raptor F-150s.

Do you want to add additional LED lights to the front end of your new 2017-2018 Raptor F-150? CJ Pony Parts has the exact upgrade kit you want with this Fog Light Bezel and Mounting Kit with a KC HiLiTES Flex LED Lights! Order yours today!

Fog Light Bezel and Mounting Kit Includes:
- Pair of two (2) stainless steel black powder coated bezels and mounting brackets
- Paintable molded ABS bezel kit
- Wire harness and can easily be connected to your AUX switches
- Stainless steel bracket and light mounting hardware
- Pair of two (2) silicone gaskets
- Pair of two (2) KC HiLiTES Flex LED Lights with black bezel rings and spread/flood beam pattern
- Able to mount additional two pairs of 3" LED cube lights (sold separately)

If you're looking for a way to increase your off-road or nighttime visibility, than this fog light bezel and mounting kit is exactly what you need! You can add up to two pairs of 3" LED cube lights to the front of your new Raptor, allowing you to have a better field of vision with stronger, clearer lights. CJ's has included almost everything you need to get started with these lighting upgrades--just be sure to grab two additional pairs (4 total) of spread/flood beam cube lights from KC HiLiTES, Rigid Industries, Baja Designs or Vision-X and you'll be good to go! This kit is made entirely in the U.S.A. and includes the bezels and mounting brackets as well as all hardware and gaskets you'll need to install the six cube lights. Your new Raptor F-150 is begging for some upgrades, so starting with the lighting and electrical is a definite no-brainer! Order this Fog Light Bezel and Mounting Kit with a KC HiLiTES Flex LED Lights from CJ Pony Parts today!

Please Note: This bezel can accommodate up to two pairs of 3" cube LED lights, and includes one pair of KC HiLiTES Flex LED lights. The two additional pairs of 3" cube lights must be purchased separately.

Tech Tip: This kit does not include a wiring harness. We highly recommend LEDWH4 wiring harness to go along with this foglight kit. LEDWH4 harness allows for an easy connection of your 6 new lights to the factory Raptor AUX switches.

Serious off-road enthusiasts know that the F-150 SVT Raptor has specialized all-terrain and powertrain components, which make it the pickup to own when you want to traverse sand, mud and countless forms of other intense terrain, at very high velocities. Get the most out of your new Raptor F-150 with high-quality performance and off-road upgrades today!

Order this upgraded Fog Light Bezel and Mounting Kit with Pair of KC HiLiTES Flex Lights for your new 2017-2018 Raptor F-150 today from CJ Pony Parts!

Similar F-150 Parts

similar F-150 parts More F-150 Parts  

F-150 Applications

This product will fit the following F-150 years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 126.83ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

will this fit the barricade bumper for the f150

Asked by: tactikitty
  • y_2017, m_10, d_20, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_en_US, sid_LBMB33, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 6.92ms
  • QUESTIONS, PRODUCT

You Might Also Like

Product Video

Fog Light Bezel And Mounting Kit With KC HiLiTES Flex LED Lights F-150 Raptor 2017-2018 Video Transcript
By Bill Tumas: When taking your Raptor off-road, you need as much visibility as you can get, so today we're going to be installing this LED fog light mountain bezel kit with two KC Flex LED lights, fitting your 2017 F-150 Raptor.

This LED fog light kit comes with two super-bright KC LED Flex lights with two bezels and brackets to mount them behind the front bumper as well as two additional LED lights on each bracket for a killer look and improved off-road visibility.

This kit comes with everything you need for an easy installation and a separate wiring harness can be purchased to make your install even easier, which we have right here. So today we're going to install it on our 2017 F-150 Raptor.

Tools you'll need for this installation, 10mm socket, an extension, 3/8ths-inch ratchet, 17mm wrench, 13mm wrench, and basic wiring tools.

The first thing we're gonna do before we install anything on the truck is install the clip-on nuts onto the brackets. There's gonna be two clip-on nuts on each bracket, and this is the front of the bracket. You're gonna install it to where the threaded portion of the nut is facing towards the front of the brackets. They're gonna go on just like this.

Okay, we have the nuts installed on the bracket. Now we're gonna install the trim pieces onto the bracket as well. These are size-specific. They're labeled D for driver's side, P for passenger's side. It is very small to see, but they are on there. Snap these pieces into place.

As you saw earlier, this kit does come with two KC FLEX lights, and there are two other spots on each bracket for more LED lights. We do offer kits with more LEDs, but this kit only came with the KC Flex, so we actually found some LED cubes laying around that we'll install onto this bracket as well.

Put the light on the bracket, then install the hardware. To install these additional lights, you're gonna use the provided hardware to make sure they're spaced properly. As you can see, we added one of the provided spacers and washers and we have this light lined up pretty good with the trim, and now we can tighten the nut.

Before we install the bracket onto the truck, the kit comes with a seal that goes around each hole right here in the bumper, so we're gonna install this first. Just spread open the seal right here, and slide it over the edge of the bumper, and just work it all the way around.

All three lights are installed. It's looking pretty awesome. Now we can put this in the truck. We're ready to put this in the truck. All we have to do is put this behind the bumper and lift it up. And there's two bolt holes already existing from the factory right here, so all we have to do is put a bolt in each one of these threaded nuts.

Here are the factory holes we're gonna be using. There's a threaded hole right here, and there's another hole right here that doesn't have any threads. Lift the whole assembly up into place, then install the bolts.

Once you get both screws in, just tighten them down with a 10mm socket. There's a couple different ways you can wire it up, but we're gonna use this wiring harness that you can purchase separately, and we're going to wire this right into the auxiliary wires on the Raptor. To wire up these lights, we're actually gonna tap into the factory auxiliary wires. These are right here. We're going to be tapping into this green wire with a blue stripe. This would be the first switch on the auxiliary port, so we're just going to wire that harness right into here, and then put our ground right here.

Patch our ground wire. All that's left to do now is plug the harness into the lights. All right, so we have this wiring harness coming down from where we hooked it up. Now we're going to push it along the skid plate to get it to the driver's side, and now that we have these connectors on the passenger's side, we can connect them to our LED lights. Just kind of plug everything in, and then you're installation's finished.

All right, we got everything wired up. Let's see how it looks. All right, we got our LED fog lights installed. It definitely gives this truck a more finished and aggressive look. I'm loving the way it looks, and we have some spot end flood lights which will give it a good pattern, and it's really going to help out when we're off-road.

It should take you less than two hours to install this, depending on how you wire it up, and before you know it, you'll be heading off-road.