Fog Light Clear With Wiring Kit Pair Toyota Tacoma 2016-2020
CJ's Part Number:
Fog Light Clear With Wiring Kit Pair Toyota Tacoma 2016-2019 is rated out of 5 by 9.
- OEM-Style Reproduction
- ABS Plastic Construction
- No Modifications Required
- Includes Necessary Wiring
You save 67%
Pair of Clear Fog Lights with a Wiring Kit for all 2016, 2017, 2018, 2019 and 2020 Toyota Tacomas.
Rated 5 out of 5 by 17Tacoma from 3rd Gen. Tacoma driving/fog lights Bought these during the Holloween special price of $58, glad I did! Fit great, pretty easy to install without disassembly of your truck. All hardware was included and worked.
Date published: 2018-11-12
Rated 4 out of 5 by 19redtaco from Works great Bought these for my sr model Tacoma and they fit great and really look good good and work great
Date published: 2019-03-24
Rated 3 out of 5 by Andy from Instructions incomplete CJ Pony does a great job explaining how to install the wire harness in your vehicle; in my case, for my 2019 Toyota Tacoma. Although there isn't any instructions on how to mount the fog lights. For example, through trial and error I found that the fog lights needs to go behind the factory mount and screwed in from the back for the light to be properly positioned. If this was identified with installation, the 1 - 1.5 hour job wouldn't have taken me 4 frustrating hours to complete. The design is pretty plain, although serves the purpose.
Date published: 2019-06-20
Rated 2 out of 5 by AFD27 from Switch does not fit! I have not had a chance to install this yet. Everything looks ok, except that the switch that comes with the kit does not fit in any of the available spots in the third gen dash. It is too big. The third gen switch holes are smaller. The only place it would fit is in the clutch cancel switch hole and that is currently occupied!
Date published: 2019-08-07
Rated 4 out of 5 by grantdce from Fantastic value! I just installed these in my 2019 Tacoma SR and they look much better than the plastic fillers that came with the truck. They also work great but I would have loved better instructions on how to install them. Thankfully, I found some YouTube videos that helped with the process. Overall, a good product and very affordable.
Date published: 2019-06-17
Rated 1 out of 5 by Foglightjunk from Junk product save your time money and effort Didn’t come with directions. Fog lamps are low quality , harness is your normal cheap harness off any website, getting help from CJ and the manufacturer are non existent. You’ll have to get an “add a fuse” unless you add the wire to an existing fuse.
Date published: 2019-05-21
Rated 5 out of 5 by TX_Tacoma_DFW from Great fog light kit I bought this after researching other sets. This kit is great quality, easy to install and works the first time. I highly recommend.
Date published: 2019-07-02
Rated 5 out of 5 by tezer from Tacoma fog light kit I bought the fog light kit for my 2019 Tacoma and wanted a factory look this kit did that, love it.
Date published: 2019-03-27
Does this come with the new bezel with holes cut out for the fog light?
This comes as shown in the images.
Date published: 2019-08-16
I bought and installed these. The switch turns the lights on/off correctly, but stays illuminated at all times in the cab, it stay green with the switch on or off with the ignition on, it goes off with key off. Is this expected behavior?
Date published: 2019-07-31
Does the kit come with wiring instructions
Yes it does.
Date published: 2019-04-24
I bought and installed these. The switch turns the lights on/off correctly, but stays illuminated at all times in the cab. Is this expected behavior?
As long as it goes off when the ignition is turned off.
Date published: 2019-04-15
Will these fit a 2019 Tacoma SR?
I just purchased the fog lights and they fit my 2019 SR just fine. The fog lights have 4 ears for attaching 2 fit into precut slots in existing housing one sits loose and the other you use a screw to mount it. The lights don't bounce around either. I was able to adjust height also. The covers in the kit fit fine to. The switch fits perfectly into the spot next to the auto headlight switch lower left kick panel area (no cutting needed) just remove switch plate.
Date published: 2019-03-28
I have a 2015 Tacoma, and have been told that Toyota no longer makes kits for 2012-2015 (Tacoma World), but that the 2016-2017 kits are identical to 2015. Will this kit work for my 2015?
The vendor has not provided any information regarding cross-fitments of this part to any other model year then what is listed.
Date published: 2019-01-09
Will these fit the 2019 SR ? Bought them for my 18, the trucks look identical
As of this time we cannot confirm fitment on the 2019.
Date published: 2019-02-21
Will this fit a 2018 SR Tacoma?
Yes, fit my 17 SR
Date published: 2018-12-23