FOOSE Knuckle Wheel 17"x7" Textured Gray With Diamond Cut Lip 1965-1973
FOOSE 17" x 7" Textured Gray Knuckle Wheel with a Diamond Cut Lip for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs.
Want to give your 1965-1973 Mustang a modern, stealthy look? Then you should check out FOOSE’s new line of Knuckle wheels! Designed specifically for your Mustang, these wheels from FOOSE are similar to classic Bullitt style wheels, with a modernized twist.
FOOSE Knuckle Wheel Purchasing Options:
- Set of Four
Each spoke in this Knuckle wheel is split by a single lug, and at first glance looks like the classic Bullitt wheel. These five rounded split-spokes begin at the center hub and extend out towards the outside of the barrel. The recessed deep dish lip also gives it that classic muscle car stance. With the stealthy Textured Gray finish, you will be breaking necks driving down the street. The large diameter of the barrel also allows you to show off your brakes as well. It’s a win-win!
*This FOOSE wheel requires small diameter, tuner style lug nuts (WHLLN7 and WHLLN8). Larger OEM style lug nuts will NOT work.
Please Note: This wheel is designed to fit most 5-lug 1965-1973 Mustangs with the correct 5 x 4.5" bolt pattern and backspacing size. However, the aggressive diameter and width of the wheel are far larger than any factory wheel found on 1965-1973 Mustangs. Please check fitment before ordering, as modifications may, or will be necessary.
- Size: 17" x 7"
- Lugs: 5 x 4.5"
- Finish: Textured Gray With Diamond Cut Lip
- Backspacing: 4.00"
- Center Cap: Included
Please Note: We recommend 225/45/17 tires on the front of 1965-1966 Mustangs to reduce the chance of rubbing. A larger tire on the front of 1965-1966 Mustangs can rub on the front wheel opening when turning.
FOOSE wheels are designed by legendary hotrod designer Chip Foose. With custom updated wheel designs, Chip Foose is able to bring hot rod styling to your classic Pony. You don't need an expensive hot rod to rock a set of unmistakable FOOSE wheels though. High quality cast 17" x 7" wheels add style to your Mustang at an affordable price. We offer plenty of options so you can turn your Mustang into a one-of-a-kind car that draws all the attention at car shows. Chip Foose has a history of building hot rods and the experience to design wheels that will compliment any Mustang.
So what are you waiting for? Give your Mustang a makeover with a set of FOOSE 17" x 7" Textured Gray Knuckle Wheels with a Diamond Cut Lip for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang from CJ Pony Parts today!
The knuckle wheel by FOOSE comes in a textured gray finish with a really cool diamond cut lip. These are available in a 17 by 7 or a 17 by 8 size fitting your 1965 through 1973 Mustang. Because of the design of the knuckle wheel it will require the use of tuner lug nuts for installation. These are going to be available as a single wheel, as a set of four staggered or a set of four same size and also available in a wheel and tire package.
These knuckle wheels by FOOSE are great and would add a nice classic look to your Mustang.