FOOSE Knuckle Wheel 17"x8" Textured Gray With Diamond Cut Lip 1965-1973
FOOSE 17" x 8" Textured Gray Knuckle Wheel with a Diamond Cut Lip for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs.
If you’re in search of the perfect wheel to throw on your 1965-1973 Mustang, then look no further than these brand new FOOSE Knuckles! These wheels are the perfect fit for a classic muscle car stance with a new-age, modernized look.
At first glance, these wheels look just like the classic Bullitt wheel, however, the split-spoke design definitely warrants a double-take. The split-spokes being at the center hub and extend outwards towards the outside of the barrel. The recessed deep dish lip also gives it the classic muscle car stance that any Mustang enthusiast loves. With the stealthy Textured Gray finish, you will be breaking necks driving down the street. The large diameter of the barrel also allows you to show off your brakes as well. You can’t lose with this killer combination.
- Size: 17" x 8"
- Lugs: 5 x 4.5"
- Finish: Textured Gray With Diamond Cut Lip
- Backspacing: 4.5"
- Center Cap: Included
FOOSE Knuckle Wheel Purchasing Options:
- Staggered Set of Four Wheels = (2) 17" x 7" and (2) 17" x 8"
*This FOOSE wheel requires small diameter, tuner style lug nuts (WHLLN7 and WHLLN8). Larger OEM style lug nuts will NOT work.
Please Note: This wheel is designed to fit most 5-lug 1965-1973 Mustangs with the correct 5 x 4.5" bolt pattern and backspacing size. However, the aggressive diameter and width of the wheel are far larger than any factory wheel found on 1965-1973 Mustangs. Please check fitment before ordering, as modifications may, or will be necessary.
*The 17" x 8" wheels are intended for use on the rear of your Mustang. Wider rear wheels have a deeper lip to enhance the look of a staggered setup.
*The 17" x 7" wheels with a 4" backspacing are intended for use on the front.
Please Note: We recommend 225/45/17 tires on the front of 1965-1966 Mustangs to reduce the chance of rubbing. A larger tire on the front of 1965-1966 Mustangs can rub on the front wheel opening when turning.
FOOSE wheels are designed by legendary hotrod designer Chip Foose. With custom updated wheel designs, Chip Foose is able to bring hot rod styling to your classic Pony. You don't need an expensive hot rod to rock a set of unmistakable FOOSE wheels though. High quality cast 17" x 8" wheels add style to your Mustang at an affordable price. We offer plenty of options so you can turn your Mustang into a one-of-a-kind car that draws all the attention at car shows. Chip Foose has a history of building hot rods and the experience to design wheels that will compliment any Mustang.
Order a set of FOOSE 17" x 8" Textured Gray Knuckle Wheels with a Diamond Cut Lip for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang from CJ Pony Parts today!
The knuckle wheel by FOOSE comes in a textured gray finish with a really cool diamond cut lip. These are available in a 17 by 7 or a 17 by 8 size fitting your 1965 through 1973 Mustang. Because of the design of the knuckle wheel it will require the use of tuner lug nuts for installation. These are going to be available as a single wheel, as a set of four staggered or a set of four same size and also available in a wheel and tire package.
These knuckle wheels by FOOSE are great and would add a nice classic look to your Mustang.