Ford Performance Coyote Crate Engine Generation 3 5.0L 460 Horsepower With M/T Engine Harness/Flywheel Mustang 2018-2022

Ford Performance:
MSRP $9,975.00
You save 6%

Ford Performance Generation 3 5.0L 460 Horsepower Coyote Crate Engine with an M/T Engine Harness and Flywheel for 2018, 2019, 2020, 2021, and 2022 Mustangs.

If you’re looking into a complete engine overhaul in your 2018-2022 Mustang, this Ford Performance M-6007-M50C Generation 3 5.0L 460 Horsepower Coyote Crate Engine with an M/T Engine Harness and Flywheel. This crate engine is a modern 5.0L 32-valve DOHC V8 that utilizes advanced features like Direct and Port Fuel Injection, Twin Independent Variable Camshaft Timing (Ti-VCT), high-flow cylinder heads, and heightened compression ratio to produce 460 horsepower at 7,000RPM and 420 feet per pounds of torque at 4,600 rpm (with premium fuel).

Features and Benefits:
- Hypereutectic Aluminum Pistons
- Sintered Steel Connecting Rods
- Forged Steel Crankshaft
- Aluminum Block with Plasma-Transferred Wire Arc Spray Weld Liner Coating
- Extended 12MM Head Bolts
- 10-Quart Oil Pan
- Lightweight Tuned Composite Intake Manifold
- 80MM Single Bore "Drive by Wire" Electronic Throttle Body with Variable Runner Control
- High-Flow Aluminum Cylinder Heads
- Dual Overhead Camshaft (four valves per cylinder)
- Variable Intake and Exhaust Camshaft Timing
- Includes Manual Transmission Engine Harness and Dual Mass Flywheel 
- Single 409 Stainless Steel Tubular Exhaust Manifold (Right Side Only)
- Common 4.6L Modular Engine Mount Bosses and Bellhousing Mount Pattern

*For 5.0L engines equipped with automatic transmission engine harness and flexplate, see p/n M-6007-M50CAUTO.

- Engine weight: 445 lbs.
- 460 Horsepower at 7,000 rpm
- 420 ft/lb Torque at 4,600 rpm
- 12.0:1 Compression ratio

This lightweight plasma transferred wire arc spray aluminum cylinder block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, optimized oil drain back and windage control to yield a vast improvement to high-RPM performance. Additionally, this engine features hypereutectic aluminum pistons, a forged steel crankshaft and sintered steel connecting rods that mimic those used on BOSS 302 Mustang engines.

Please Note: Does not include alternator, for alternator kit see M-8600-M50BALT, 5.0L Coyote air conditioning kit available, see M-8600-M50AC, 5.0L Mustang motor mount kit available, see M-6038-M50 and 5.0L Mustang engine cover kit available, see M-9680-M50B. Lift Gate Required.

Tech Tip: Vehicle harness and PCM NOT included, use Ford Performance M-6017-M50B Control Pack which includes wiring, PCM and installation kit, designed for project car installation.

California Residents: Proposition 65 Warning

Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:

  • 1965 and older U.S. manufactured California certified vehicles
  • 1967 and older U.S. manufactured federally certified vehicles

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.