Ford Performance Crate Engine Assembly Aluminator N/A 12.0:1 Mustang GT Gen 3 5.0L 2018-2021

Ford Performance:


  • Proudly Made in the USA!
  • For 5.0L (302 Cubic Inches)
  • 12.0:1 Compression Ratio
  • Designed for N/A Applications
MSRP $12,695.00
You save $649.01

Ford Performance Aluminator N/A 12.0:1 Crate Engine Assembly for all 2018, 2019, 2020 and 2021 5.0L Gen 3 GT Mustangs.

Do you drive a 2018-2021 GT Mustang? If so, you can improve the performance of your 5.0L Coyote engine today with this Ford Performance Aluminator N/A 12.0:1 Crate Engine Assembly (M-6007-A50NAB) from CJ Pony Parts!

Features and Benefits:
- 5.0L (302 cubic inches)
- 12.0:1 compression ratio (nominal)
- Mahle Hard Anodized forged pistons with Grafal low friction coating
- Manley H-beam connecting rods with ARP 2000 bolts
- Forged steel crankshaft
- Uses production 2020 Mustang GT aluminum block and 10 quart oil pan
- Tuned composite Mustang GT intake manifold with production drive by wire 80 mm throttle body variable runner control
- Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction
- Mustang GT production camshafts

This Aluminator N/A 12.0:1 Crate Engine Assembly is designed and built by Ford Performance to deliver a higher performance than ever! It is made using connecting rods and pistons that are specifically designed for high performance N/A (Naturally Aspirated) applications. It features forged pistons with a Mahle 12.0:1 compression ratio that are hard anodized with a Grafal low friction coating. The connecting rods are premium Manley H-beam with ARP 2,000 bolts. This new Crate Engine Assembly (M-6007-A50NAB) is a direct bolt-in installation for your 2018-2020 GT Mustang.

*A version of this Aluminator Crate Engine Assembly is also available with a lower (9.5:1) compression ratio and is designed for use with Forced Induction applications - see P/N: M-6007-A50SCB

- Ford Performance Colder Heat Range Zero (0) Spark Plugs - see P/N: M-12405-M50A
- Ford Performance Oil Filter - see P/N: M-6731-FL820
- Ford Performance Billet Steel Gerotor Oil pump Gears - see P/N: M-6600-M50A

Additional Notes:
- This assembly does NOT include the alternator (see P/N: M-8600-M50BALT or P/N: M-8600-M50ALTA), exhaust manifolds and the vehicle harness and PCM.
- Use Ford Performance wiring, PCM and installation kit (see P/N: M-6017-M50B) designed for manual transmission street rod/project car installation. Can also be equipped with automatic transmission controls pack (see P/N: M-6017-M50BA).

Tech Tip: Engine mount bosses and bell housing mount pattern is common to other 4.6L modular engines.

California Residents: Proposition 65 Warning

Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:

  • 1965 and older U.S. manufactured California certified vehicles
  • 1967 and older U.S. manufactured federally certified vehicles

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.
Complete Your Package
Add to Cart