Ford Performance Crate Engine Assembly Aluminator N/A 12.0:1 Mustang GT Gen 3 5.0L 2018-2022

Ford Performance:
M-6007-A50NAB

Highlights

  • Proudly Made in the USA!
  • For 5.0L (302 Cubic Inches)
  • 12.0:1 Compression Ratio
  • Designed for N/A Applications
MSRP $13,755.00
$12,700.00
You save 8%

Ford Performance Aluminator N/A 12.0:1 Crate Engine Assembly for all 2018, 2019, 2020, 2021, and 2022 5.0L Gen 3 GT Mustangs.

Do you drive a 2018-2022 GT Mustang? If so, you can improve the performance of your 5.0L Coyote engine today with this Ford Performance Aluminator N/A 12.0:1 Crate Engine Assembly (M-6007-A50NAB) from CJ Pony Parts!

Features and Benefits:
- 5.0L (302 cubic inches)
- 12.0:1 compression ratio (nominal)
- Mahle Hard Anodized forged pistons with Grafal low friction coating
- Manley H-beam connecting rods with ARP 2000 bolts
- Forged steel crankshaft
- Uses production 2020 Mustang GT aluminum block and 10 quart oil pan
- Tuned composite Mustang GT intake manifold with production drive by wire 80 mm throttle body variable runner control
- Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction
- Mustang GT production camshafts

This Aluminator N/A 12.0:1 Crate Engine Assembly is designed and built by Ford Performance to deliver a higher performance than ever! It is made using connecting rods and pistons that are specifically designed for high performance N/A (Naturally Aspirated) applications. It features forged pistons with a Mahle 12.0:1 compression ratio that are hard anodized with a Grafal low friction coating. The connecting rods are premium Manley H-beam with ARP 2,000 bolts. This new Crate Engine Assembly (M-6007-A50NAB) is a direct bolt-in installation for your 2018-2020 GT Mustang.

*A version of this Aluminator Crate Engine Assembly is also available with a lower (9.5:1) compression ratio and is designed for use with Forced Induction applications - see P/N: M-6007-A50SCB

Includes:
- Ford Performance Colder Heat Range Zero (0) Spark Plugs - see P/N: M-12405-M50A
- Ford Performance Oil Filter - see P/N: M-6731-FL820
- Ford Performance Billet Steel Gerotor Oil pump Gears - see P/N: M-6600-M50A

Additional Notes:
- This assembly does NOT include the alternator (see P/N: M-8600-M50BALT or P/N: M-8600-M50ALTA), exhaust manifolds and the vehicle harness and PCM.
- Use Ford Performance wiring, PCM and installation kit (see P/N: M-6017-M50B) designed for manual transmission street rod/project car installation. Can also be equipped with automatic transmission controls pack (see P/N: M-6017-M50BA).

Tech Tip: Engine mount bosses and bell housing mount pattern is common to other 4.6L modular engines.

California Residents: Proposition 65 Warning

Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:

  • 1965 and older U.S. manufactured California certified vehicles
  • 1967 and older U.S. manufactured federally certified vehicles

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.