Ford Performance Crate Engine N/A Aluminator 11.0:1 Compression Mustang 5.0L 4V DOHC Coyote GT 2015-2017

Ford Performance:
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 4.4ms
  • bvseo-msg: HTTP status code of 404 was returned;
MSRP $10,995.00
You save 7%

Ford Performance N/A Aluminator 5.0L 4V DOHC Coyote Mustang Crate Engine with 11.0:1 Compression for 2015, 2016 and 2017 GT Mustangs.

If you are looking for a performance crate motor for your 2015-2017 GT Mustang or a custom build, then this Ford Performance N/A Aluminator 5.0L 4V DOHC Coyote Mustang Crate Engine with 11.0:1 Compression (M-6007-A50NAA) from CJ Pony Parts is just what you are looking for! This motor is built with forged Manley H-beam connecting rods with ARP 2000 bolts fitted with BOSS 302 high-performance bearings and Mahle 11.0:1 compression ratio forged pistons that are hard anodized and feature a Grafal low friction coating to endure high-performance applications. This motor will bolt directly into your 2015-2017 GT Mustang. If you are looking to use this motor for a street rod or restomod you will need Ford Performance’s 5.0L engine control pack (P/N: M6017504V).

Engine Specifications:
- Fits 2015-2017 Mustang GT
- 5.0L (302 cubic inches)
- 11.0:1 compression ratio (nominal)
- Mahle Hard Anodized forged pistons with Grafal low friction coating
- Manley H-beam connecting rods with ARP 2000 bolts
- BOSS 302 connecting rod bearings
- Forged steel crankshaft
- Uses production 2017 Mustang GT aluminum block
- Large rear sump oil pan with 8 quart capacity features optimized oil drainback and windage tray to control oil and improve high-rpm performance
- Tuned composite Mustang GT intake manifold with production drive by wire 80 mm throttle body variable runner control
- Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction.
- Boss 302 Valve Springs
- Mustang GT production camshafts
- Intake: 13mm lift 260 degrees duration
- Exhaust: 13mm lift 263 degrees duration
- Ford Performance engine cover kit
- Includes Ford Performance colder, heat range zero (0) spark plugs
- Includes Ford Performance oil filter
- Includes billet steel gerotor oil pump
- Engine mount bosses and bell housing mount pattern common to 4.6L modular engines

Please Note: The Vehicle harness and PCM is not included. Purchase Ford Performance PCM and installation kit designed for street rod/project car installation. Can also be equipped with automatic engine harness and then used in conjunction with automatic transmission controls pack.

*Does Not Include Exhaust Manifolds, Flywheel/Flex Plate or an Alternator Kit.

Tech Tip: In order for low oil sensor to function in your 2015-2016 Mustang, re-use existing oil pan or replace with BR3Z-6675-A pan.

By buying your Ford Performance (formerly Ford Racing) parts from CJ Pony Parts, you know you're getting your Mustang parts from a reliable, reputable dealer since CJ Pony Parts is a Top 10 Ford Performance Dealer and has been for the last 10 years. We believe that offering top quality products such as Ford Performance crate engines validates our commitment to helping our customers get the most pleasure and satisfaction from Mustang ownership.

Order this Ford Performance M-6007-A50NAA N/A Aluminator 5.0L 4V DOHC Coyote Mustang Crate Engine with 11.0:1 Compression for your 2015, 2016 or 2017 GT Mustang from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.59ms
  • bvseo-msg: HTTP status code of 404 was returned;

Will it fit on a ecoboost mustang. Dont want to buy new transmissions. Do mustang gt and EcoBoost have same auto transmission?

Asked by: Singh
The engine control harness will not work with a computer controlled transmission.
Answered by: rk cjpp
Date published: 2019-03-20

would my 03 stangs 4.6 2v auto trans work on this engine?

Asked by: nick45
It could work but may not be able to handle the extra power.
Answered by: rk cjpp
Date published: 2018-03-30

can I order this aluminator without the intake and throttle body? if so what is the price difference I only need the heads down.

Asked by: danny1985
Use this engine,
Answered by: rk cjpp
Date published: 2020-02-02
  • y_2020, m_5, d_31, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_M6007A50NAA, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 162.76ms