Ford Performance Long Block Engine Assembly Gen 3 Coyote 460HP Mustang 5.0L 2018-2022

Ford Performance:


  • Hypereutectic Aluminum Pistons
  • 460 HP at 7,000 RPM
  • 420 ft/lb Torque at 4,600 RPM
  • Forged Steel Crankshaft
MSRP $8,300.00
You save 25%

Ford Performance Coyote 460 Horsepower Gen 3 Long Block Engine Assembly for 2018, 2019, 2020, 2021, and 2022 5.0L Mustangs.

If you're not seeing the high-rpm performance you desire from your 2018-2022 5.0L Mustang, then this Coyote 460 Horsepower Gen 3 Long Block Engine Assembly M-6006-M50C from Ford Performance is the must-have item you're missing. This modern 5.0L 32-valve DOHC V-8 engine uses innovative features like Direct and Port Fuel Injection, Twin Independent Variable Camshaft Timing (Ti-VCT) and high-flow cylinder heads. These advanced features, along with an increased 12.0:1 compression ratio, combine to deliver 460 horsepower at 7,000 rpm and 420 ft./lb.+ of torque at 4,600 rpm.

The lightweight aluminum cylinder block features a plasma-transferred wire-arc spray weld liner coating, in addition to cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength. It also boasts optimized oil drain back and windage control to further support high-rpm performance.

Features and Benefits:
- 460 Horsepower at 7,000 RPM
- 420 ft/lb.+ of Torque at 4,600 RPM
- 12.0:1 Compression Ratio
- Hypereutectic Aluminum Pistons
- Durable Forged Steel Crankshaft
- 10qt Capacity Composite Oil Pan 
- High-flow Aluminum Cylinder Heads
- Dual Overhead Camshaft (DOHC)
- Four Valves Per Cylinder
- Variable Intake and Exhaust Camshaft Timing
- 445lb Engine Weight

This Ford Performance long block engine assembly utilizes the same sintered steel connecting rods as used on Boss 302 Mustangs. The assembly features engine mount bosses and a bell housing mount pattern commonly seen on 4.6L modular engines. 

Only the best components were used in this assembly, including hypereutectic aluminum pistons, a 10qt capacity composite oil pan and a forged steel crankshaft for strength and durability. You'll also reap the benefits of longer, 12mm head bolts to achieve a higher clamp load.

Does NOT Include:
- Intake Manifold/Throttle Body
- Fuel Rails/Fuel Injectors
- Water Pump Pulley
- Alternator
- Exhaust Manifolds
- Flywheel or Flexplate
- Engine Wiring and/or PCM

Please Note: Delivers 460 horsepower at 7,000 rpm and 420 ft./lb.+ of torque at 4,600 rpm with premium fuel.

California Residents: Proposition 65 Warning

Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:

  • 1965 and older U.S. manufactured California certified vehicles
  • 1967 and older U.S. manufactured federally certified vehicles

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.