Ford Performance Pinion Flange 4-1/4" Cobra 2003-2004

Ford Performance: M-4851-B
MSRP: $64.00
CJ's Low Price:
$51.00
1508544000 23678
Earn 51 RPM Points What's this?
Ford Performance Pinion Flange 4-1/4" Cobra 2003-2004
Ford Performance Pinion Flange 4-1/4" Cobra 2003-2004 Ford Performance Pinion Flange 4-1/4" Cobra 2003-2004 Ford Performance Pinion Flange 4-1/4" Cobra 2003-2004 Ford Performance Pinion Flange 4-1/4" Cobra 2003-2004
Ford Performance

Product Description

Ford Performance 4-1/4" Pinion Flange for all 2003-2004 Cobra Mustangs.

A worn or faulty pinion flange can cause vibrations on your 2003-2004 Cobra Mustang's rear end & driveshaft, along with the potential to leak differential fluid. Make sure you don't run into that issue by purchasing this 4-1/4" Pinion Flange from Ford Performance. Located on your rear pinion, this OE-style replacement will connect your driveshaft to the rear axle assembly to ensure a smooth, efficient performance.

Ford Performance's M-4851-B pinion flange is a replica of the original found on 2003-2004 Cobra Mustangs, acting as a quality & convenient replacement for your SN95. With a factory bolt-on design, the flange will easily mount into place.

Please Note: Despite being specifically designed for Cobra Mustangs, this pinion flange will fit all 2003-2004 Mustangs as long as it has an 8.8" rear drive pinion.

When you purchase items from Ford Performance (formerly Ford Racing) at CJ Pony Parts, you know you're getting your Mustang parts from a reliable, reputable dealer, since CJ Pony Parts is a Top 10 Ford Performance Dealer and has been for the last 10 years. When you buy your Ford Performance parts from CJ Pony Parts, you know you have a winning combination!

Purchase Ford Performance's M-4851-B 4-1/4" Pinion Flange for your 2003-2004 Cobra Mustang from CJ Pony Parts today!

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 123.09ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

Hello, I'm trying to swap my 7.5 rearend to a 8.8 on a 2004 mustang v6, do I need these to fit the drive shaft or would it bolt directly to the stock bolt pattern?

Asked by: 04whitemustang
If the drive shaft doesn't bolt up o the 8.8 flange than the driveshaft rear yoke or the driveshaft would have to be changed.
Answered by: rk cjpp
Date published: 2017-02-28
  • y_2017, m_10, d_20, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_M4851B, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 238.21ms
  • QUESTIONS, PRODUCT

You Might Also Like