Ford Performance Taillight Panel Molding 2018-Style Gloss Black Without Emblem 2015-2020

Ford Performance:
M-16600-MA
Rating:
98% of 100

Highlights

  • Quality Gloss Black Finish
  • OE Construction
  • Smooth Panel W/O Emblem Holes
  • Complete Trim Panel
MSRP $199.00
$169.99
You save 15%

Ford Performance Gloss Black 2018-Style Taillight Panel Molding without an Emblem for all 2015, 2016, 2017, 2018, 2019 and 2020 Mustangs.

Add some custom style to your 2015-2020 Mustang without dealing with a huge price tag with this Ford Performance M-16600-MA Gloss Black 2018-Style Taillight Panel Molding without an Emblem. Installing this panel will give the rear of your 2015-2020 Mustang a clean and understated appearance that will be original enough to turn heads wherever you may go!

Features and Benefits:
- OE quality gloss black ABS plastic
- 2018-style appearance
- Eliminates factory trunk emblems
- Helps fill the gap between the taillights
- Clean up the rearward facing appearance
- Requires no permanent modifications
- Made in the USA
- Easy installation with no drilling

This taillight panel molding is pulled from the factory Ford assembly line before the mounting holes for the Horse or GT emblems are drilled and the badges are placed in the part. The gloss black color scheme on this OE-style panel will add to and complement your blacked-out theme. This taillight panel molding is modeled to look like the 2018 style, to add an upgraded appearance to your Mustang. Easily installed, this panel utilizes the original hardware and requires no drilling or vehicle modifications.

*This taillight panel will fit all 2015-2020 Mustang models.

By buying your Ford Performance parts from CJ Pony Parts, you know you're getting your Mustang parts from a reliable, reputable dealer, since CJ Pony Parts is a Top 10 Ford Performance Dealer and has been for the last 10 years. When you buy your Ford Performance Mustang parts from CJ Pony Parts, you know you have a winning combination.

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

Today I want to give my 2018 Mustang a cleaner look on the back by installing a Ford Performance taillight panel molding.

This Ford Performance taillight panel molding will be a direct replacement for the factory molding on all 2015-2018 Mustangs. It's made of the 2018 style, with the grooves cut into it for a custom look, but no emblem for a much cleaner overall appearance. This is made with AVS plastic, just like the original, made right here in the USA.

For this instillation, you need a 1/4 ratchet, 5.5 millimeter socket, 7 millimeter socket, short extension and a plastic pry bar.

To begin the installation, you're gonna open your trunk and these two little panels right here, grab a small plastic screwdriver or plastic pry bar. We're gonna pop them off on both sides and then remove the bolts. When you remove these screws, the last thing you want is for them to drop down in the trunk, so if you have someone to help you, get the trunk kind of nice and even like that. That way, when you remove them, they'll come straight out.

At this point, the panel's only held on by clips across here. If you actually pull back, you can sort of see that. What were gonna do, put some tape along the edge here so we can carefully pry it off without damaging our paint.

Plug your backup camera and pull it out. And before beginning the installation, you want to make sure none of these clips got left behind. The new panel comes with new clips, so if these are in there it's not gonna go into place, so if you have any left in, just carefully pry them out.

More than likely your car's going to have a backup camera. If you have one of the early 2015 base models that doesn't have the backup camera, this is actually ready to install, as it comes with a delete. In my case, I do have the camera, so I've got to remove the delete and move the camera over.

Getting ready to put the camera over into the new panel, making sure I keep the orientation the same. As I can tell you from experience, it is possible to install these upside down.

We're ready to install. Ready to install our panel. A couple things to be careful with here. Obviously you've got to make sure to plug the backup camera back in, but these two pieces here, they go underneath here to lock the bottom in place, so make sure they are seated properly as well.

Now as you're sliding up, you're gonna notice here that your new panel has these pins on it and notice on your factory, at least on the '18 for sure, they are broken off, but this is just a piece of tape. This pin will push right through the tape and align when it goes on. To get everything lined up, just simply push.

Okay, now we're ready to reinstall the factory screws. Sort of pull down on the panel. Make sure the holes are lined up.

Now reinstall the covers. And your installation's finished.

As you saw, the Ford Performance taillight panel molding is very easy to install. It gives a nice, cleaner look in the back. I was honestly a little worried without the emblem these would look out of place but honestly on the car, I think it looks pretty good. You just saw the installation, though. It was pretty straight forward. This a half an hour install. You'll be back on the road in no time.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.