Ford Performance Crate Engine 460 CID Boss 351 Block 575 HP Front Sump

Ford Performance:
M-6007-Z460FFT
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 115.65ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
$9,799.99

Ford Performance 575 Horsepower 460 Cubic Inch Crate Engine with a Boss 351 Block and Front Sump Oil Pan.

Big blocks are so large that they can be difficult to fit in your vehicle's engine bay. Now you can get big block displacement in a small block package. Ford Performance's Z460 crate engine is the biggest small block Windsor crate engine ever created. The large cubic inch displacement motor pumps out 575 HP and 575 TQ. The foundation of the Z460 is Ford Performance's, formerly Ford Racing, legendary Boss 351 block with premium internal components from the best aftermarket companies. A SCAT forged steel crankshaft, SCAT forged H-beam connecting rods, forged Mahle pistons and Clevite bearings offer high strength and durability to contain the massive amounts of horsepower and torque. The engine is topped off with high port/high flow Ford Performance Z-Heads. Every Ford Performance Z460 engine is hand assembled in the US with strict performance clearances.

Engine Specs and Features:
- Ford Boss 351 block with 9.5" deck height
- Displacement: 460 cubic inches
- Bore x Stroke: 4.150" x 4.250"
- SCAT forged steel crankshaft
- SCAT 6.125" forged steel H-beam connecting rods
- Mahle forged pistons with floating wrist pins
- Camshaft type: Hydraulic roller
- Camshaft lift: .594"/.618"
- Camshaft duration (@ 0.050"): 242&deg/248&deg
- Ford Racing M-6049-Z304DA aluminum "Z" cylinder heads
- Valve size: 2.02" intake/1.60" exhaust
- Compression ratio: 10.0:1
- Rocker arms: Ford Racing M-6562-F31 roller rocker arms
- Rocker arm ratio: 1.65:1
- Vibration damper: Ford Racing M-6316-D302 SFI approved
- Valve covers: Ford Racing cast aluminum painted silver
- Oil pan: Steel deep front sump (9 quart) pan with louvered windage tray and crankshaft scraper
- Water pump: Ford Racing M-8501-G351 - long type - standard rotation
- Ford Racing M-9439-A50 intake manifold gaskets
- Premium unleaded fuel required
- Ignition timing: 32&deg at 4,000 RPM
- Maximum recommended RPM: 5,600 RPM
- Internally balanced: Neutral
- Recommended intake: Edelbrock Part # 2924 Super Victor (Not included)
- New oil pump and water pump
- Engine power ratings achieved with Edelbrock Super Victor intake, Holley 850 CFM carburetor, long tube headers
- Depending on your application, a different timing cover, water pump, performance oil pan and pickup may be required

Installation Notes:
- Includes a performance oil pan and pick-up, standard rotation timing chain cover, M-8501-G351 standard rotation water pump and non-EFI valve covers
- M-6059-D351 timing chain cover will work with most standard rotation water pumps
- Crankshaft damper M-6416-D302 may require a spacer for pulley alignment
- Flywheel not included. The engine is neutrally balanced
- Firing order: 1-3-7-2-6-5-4-8 (5.0L HO and 351W firing order)

*Distributor not included. Steel distributor gear required.
*Flywheel not included. Neutral balanced flywheel required.

Order this Ford Performance (M-6007-Z460FFT) 575 Horsepower 460 Cubic Inch Crate Engine with a Boss 351 Block and Front Sump Oil Pan from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Vehicle Fitment

This product will fit the following F-100 years:

  • 1948,
  • 1949,
  • 1950,
  • 1951,
  • 1952,
  • 1953,
  • 1954,
  • 1955,
  • 1956,
  • 1957,
  • 1958,
  • 1959,
  • 1960,
  • 1961,
  • 1962,
  • 1963,
  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
  • 1972,
  • 1973,
  • 1974,
  • 1975,
  • 1976,
  • 1977,
  • 1978,
  • 1979,

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.14ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Will this engine replace 351c in a 1970 cougar

Asked by: big j
It would not be a direct replacement, this engine is based off of a windsor block.
Answered by: rk cjpp
Date published: 2020-02-24

Hello, I will start to restore a fastback 1967. Can I use this engine 460 (or 427)? If yes, I want to install a new Manual Transmission, could you suggest me the right one for this type of engine? Thank you

Asked by: Halley
Check out Ford Performance: M-7003-R58C.
Answered by: rk cjpp
Date published: 2020-01-26

Do you have any Ford FE 360 s or 390?

Asked by: Frankie Frank
The Ford FE series of engines have a great history  in performance but unfortunately with the current popularity of small block strokers and the four cam Modular engines, there’s not much demand for the classic FE’s.  But there’s a great source for record setting FE performance engines that should have what you need. Survival Motorsports specializes in 390, 427 and 428 FE engines. Full details are available on their website.  
Answered by: Analog Dan
Date published: 2019-12-01

I got a 1970 302 mustang coupe, would this engine fit in my engine bay? if so whats the best automatic transmision i should pair it with to withstand at least 750 horsepower?

Asked by: asap70mustang
asap70mustang...The 1970 Mustang engine bay  has enough width between the shock towers to fit this engine without modifications. Performance Automatic offers a few good choices for high horsepower Ford applications. Their # PA26108 Super Comp C4 transmission is extensively modified with heavy duty internal components. It’s rated for 1000 horsepower and comes with a lifetime warranty. C4 transmissions don’t come with a bellhousing so you would have to choose one. Select a torque converter with the correct stall speed to match your engines requirements and you’re good to go. 
Answered by: Analog Dan
Date published: 2019-12-01

Is that $9800 Canadian?

Asked by: donaldhk
It is in U.S. dollars.
Answered by: rk cjpp
Date published: 2019-09-26

I’m lookin to put a big block in my 2017 mustang? Is this possible and what do you recommend?

Asked by: Humhim
I would recommend modding the existing engine.
Answered by: rk cjpp
Date published: 2019-08-16

Can this engine be used with a fuel injection application? 

Asked by: Harry 47
Yes it can.
Answered by: rk cjpp
Date published: 2019-06-03

I’d like to put this engine in my 1969 Mustang.  I currently have an ‘88 302.  It should be a pretty straight forward swap out?

Asked by: Brid3356
There will be a few things you have to swap over like the oil pan and pick up tube.
Answered by: rk cjpp
Date published: 2019-04-08
  • y_2020, m_3, d_28, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_61
  • loc_en_US, sid_M6007Z460FFT, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 32.66ms
  • QUESTIONS, PRODUCT