Ford Performance Throttle Body Dual Bore 65mm Aluminum Cobra Jet 2007-2013

Ford Performance: M-9926-CJ65
MSRP: $759.00
CJ's Low Price:
1508630400 24265
Earn 685 RPM Points What's this?
Ford Performance Throttle Body Dual Bore 65mm Aluminum Cobra Jet  2007-2013
Ford Performance

Product Description

Ford Performance Cobra Jet Aluminum 65mm Dual Bore Throttle Body for 2007, 2008, 2009, 2010, 2011, 2012 and 2013 GT500 Mustangs.

Ford Performance's Cobra Jet throttle body is validated through hundreds of hours of dyno, racing and street performance driving. The twin bore 65mm throttle body (stock SVT Mustangs use a twin bore 60mm throttle body) features a 1517 CFM rating. Consistent high flow comes from the precision billet construction and tapered inlet. Once machined, the throttle body receives a CNC'd Ford Racing logo and polished finish.

There is no need to tear apart your original throttle body as this is a bolt-on part that comes fully assembled with throttle position sensor and actuator motor. Calibration for idle air flow uses the same procedure as production throttle bodies. Testing for cold and hot weather operation is compliant with Ford original equipment specifications. OE gears prevent gear bind and wear, which is common with other aftermarket throttle bodies.

This throttle body fits in the factory location on 2007-2013 Shelby GT500s. Also, it fits 2011-2013 GT Mustangs with Ford Performance's supercharger kit M-6066-MGT624D.

*Computer calibration is required.
*All CFM ratings are calibrated at 28-inches of water. Measured on SuperFlow SF-1020 Flow Bench.

Order a Ford Performance M-9926-CJ65 Cobra Jet Aluminum 65mm Dual Bore Throttle Body for your 2007, 2008, 2009, 2010, 2011, 2012 or 2013 GT500 Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Throttle Bodies  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 7.92ms
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

would it work on a boss 302 2012

Asked by: boss3022012
No. They are a single round blade.
Answered by: fordprotech
Date published: 2016-05-25

is it match and install on Ford Racing Intake Manifold Cobra Jet GT 2011-2014 ?

Asked by: WJDsnd
Yes, this is one of the throttle bodies that works on the Cobra Jet Intake Manifold.
Answered by: CJ Pony Parts
Date published: 2015-05-18
  • y_2017, m_10, d_21, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_M9926CJ65, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 7.08ms

You Might Also Like