Ford Steering Wheel Boss 302 Alcantara Mustang 2010-2014



  • OEM Ford Licensed
  • Direct-Fit Replacement
  • Alcantara Suede
  • Audio And Cruise Buttons
MSRP $556.55
You save 8%

Ford Boss 302 Alcantara Steering Wheel for 2010, 2011, 2012, 2013 and 2014 Mustangs.

Add some Boss 302 style to the interior of your 2010-2014 V6 or GT Mustang with this OEM 2012 Boss 302 Alcantara Steering Wheel from Ford! This steering wheel will fit all 2010-2012 Mustangs. It is wrapped in a soft Alcantara suede with aluminum spokes.

Features and Benefits of the Ford Boss 302 Alcantara Steering Wheel (CR3Z-3600-AA):
- Genuine Ford OE part
- Direct replacement for 2012 Boss 302 Mustangs
- Adds Boss 302 styling to your 2010-2014 V6 or GT Mustang
- Covered with Alcantara suede
- Audio and cruise control buttons

This genuine Ford OE part includes the steering wheel mounted audio controls as well as the factory cruise control buttons. This is a direct swap for 2013-2014 Mustangs without Sync.

*This steering wheel does NOT have Sync control buttons.

 *You must reuse your original airbag.

Please Note: This steering wheel's audio controls will NOT work on base 2010-2012 Mustangs.

Throughout every generation of the Mustang, the Ford Motor Company has made many of its parts internally, meaning if you're looking to replace a part on your Mustang, there's no better source than the OEM parts from Ford.

Order Ford's CR3Z-3600-AA Boss 302 Alcantara Steering Wheel for your 2010, 2011, 2012, 2013 or 2014 Mustang from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

We’ve recently updated the interior of a 2011 Mustang GT by installing the Alcantara suede shift boot and parking brake boot off the GT 500. Today we’re going to finish off that look by installing this Boss 302 Alcantara steering wheel.

This steering wheel’s going to use the factory airbag and is a direct replacement for the factory wheel on all 2010 through 2014 Mustangs. In the case of our 2011, it does have the SYNC system. We’re going to remove the buttons that are included and swap them out for the correct ones. For this installation, you need a half-inch ratchet, 15/16 socket, quarter-inch ratchet, short extension, 8-millimeter deep socket, small pick, and Loctite.

Since the installation is going to require the removal of the factory airbag, your very first step’s going to be to disconnect your battery. Once you have the battery disconnected, we’re going to work on removing our factory airbag. There’re two plastic covers on each side of the steering wheel. You’re going to remove those covers. There’s a bolt underneath. Remove both bolts, then you can remove the airbag.

I’m going to use a small pick to carefully remove the cover. Now I’ll remove both bolts. They’re pretty far in there, so a small magnet will help you get the bolts out. We’ll give a little shimmy to the airbag and pull it out. There’s a large bolt here in the center. We’re going to remove that next so we can remove our steering wheel from our column. Next, we’ll disconnect the steering wheel controls harness, like that. We’re going to remove our wheel.

You can see the stock GT wheel next to the Alcantara Boss 302. The main difference here is going to be the controls. Our car has SYNC, so it has additional controls on this side of the steering wheel, versus standard controls on this Boss 302 wheel. We’re going to switch these two modules.

The controls are clipped in, so we want to get a pick and go underneath, and just carefully lift up. As it pops off, just disconnect the harness. We’ll do the same thing with our new wheel. To change the wiring harness, you’ve just got to change this module out. Pop it in place, and we’re ready to install.

Put our new steering wheel on the same way we took the old one off. We’ll plug it in. Put a dab of Loctite on the steering wheel bolt. Reconnect the airbag. Plugs are color-coated, so you know which one you’re going to. Back into place, and reinstall the bolts. We’ll connect our battery, and our installation’s finished.

We’ll try out our controls and make sure they work properly. Volume’s good. Search is good. Source is working properly. Try our SYNC and make sure that’s working properly.

Speaker 2: SYNC. Please say a command.

Everything works as it’s supposed to. The Alcantara steering wheel gives our 2011 GT an almost exotic feel. It’s a perfect match for the shift boot and parking brake boot that we already installed. Installation should only take you around 15 minutes. You’ll be back on the road in no time.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.
Complete Your Package
Add to Cart