Ford Tailgate Damper Kit OEM F-150 2015-2019/F-150 Raptor 2017-2019
Ford OEM Tailgate Damper Kit for 2015, 2016, 2017, 2018 and 2019 F-150s and 2017-2019 F-150 Raptors.
Is it easy to raise and lower the tailgate on your 2015-2019 F-150 or F-150 Raptor? Does it open and close in a safe and smooth motion? If not, it’s time to pick up this Ford OEM Tailgate Damper Kit that’s now available at CJ Pony Parts!
Tailgate Damper Kit (FL3Z-99406A10-A OEM) Features and Benefits:
- Lowers Tailgate in Safe and Controlled Manner
- Soft Landing at Full Open Every Time
- OE Ford Factory Original Part
- Places Support Strut Behind Taillight Instead of in Exposed Area
- New Roller Replaces Non-Assist Roller Assembly
This Ford Tailgate Damper Kit lowers your F-150’s tailgate in a more safe and controlled manner, and it’ll land softy at full open every time! The included new roller will replace your F-150’s original non-assist roller assembly. You’ll attach the strut to the new roller assembly ball stud and to the factory upper ball stud that’s on the bed behind the passenger side taillight. This brand-new damper is an original Ford factory part so you know it'll be a perfect fit for your newer F-series truck! What are you waiting for? Grab yours from CJ's today!
For 2011-2018 F150 owners who are looking for genuine parts and accessories, you're lucky enough to have a number of different parts and pieces to choose from. CJ Pony Parts is proud to partner with Ford to carry these factory-original parts and much more, allowing you to easily upgrade your F-150 in any way you want. Browse our OEM parts for your new Ford truck today at CJ's!
Order this brand-new Ford (FL3Z-99406A10-A) OEM Tailgate Damper Kit for your late-model 2015, 2016, 2017 or 2019 F-150 or your 2017, 2018 or 2019 F-150 Raptor today from CJ Pony Parts!
California Residents: Proposition 65 Warning
This tailgate damper kit is a genuine Ford product designed to perfectly fit your 2015 to 2018 F-150. It replaces the original tailgate roller and replaces the shock behind the tailgate for a nice clean look. It'll make opening the tailgate so much easier. And today we're going to install it on our 2016 F-150.
To install this damper kit, the first thing we're going to do is go underneath the truck and disconnect the tailgate harness. Right behind the tailgate and above the spare tire, you will find this connector right here, you need to disconnect it so you can pull the tailgate harness out of the truck. And now the tailgate can be removed. Once you have the tailgate harness disconnected, you can lower the tailgate and remove the cables that hold it on.
Lift up the tailgate slightly so there's some slack of the cable and lift up on this metal tab right here with a screwdriver or your finger and slide it forward and pull the cable off and do the same thing for the other side. Lift up on the tailgate so it lines up with the slot right here and you can pull it right out. Locate the two T50 Torx bolts right here and remove them. Locate the two 8 mm screws holding on the taillight and remove them.
Remove the taillight. Disconnect your plugs and put the taillight aside. Grab your new roller and install it. And then reinstall your two bolts right there. Grab your damper shock and notice how one of the heads is angled, you're going to put the angled head right here on this mount and put the straight head on the roller arm. Snap it on just like that. And snap it onto the ball. Line the taillight up with all the tabs and snap it in.
Reinstall both screws. Make sure the roller is lined up right so you can install the tailgate. Finally, attach both cables. Finally, reconnect the tailgate harness. Okay, we got our damper kit installed and as you can see the tailgate opens nice and smooth. This is way better than what it was before. Installation for this is really simple. It really only should take about 30 to 45 minutes and before you know it, you'll be heading off-road.
- Ford HitchScan Rear Park Assist Sensor And Hitch Step F-150 2009-2019$233.10 Regular Price $259.00