Front Power Disc Brake Conversion Kit With Power Master Cylinder Automatic 1967-1969

CJ's Part Number:
DBF194
Front Power Disc Brake Conversion Kit With Power Master Cylinder Automatic 1967-1969 is rated 5.0 out of 5 by 1.
  • y_2019, m_10, d_17, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_DBF194, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 129.68ms
  • REVIEWS, PRODUCT

Highlights

  • Front Power Disc Conversion
  • Large Capacity Dual Master
  • Disc/Drum Proportioning Valve
  • Includes All Needed Parts
$919.99

Front Power Disc Brake Conversion Kit with Power Master Cylinder for 1967, 1968 and 1969 Mustangs with an Automatic Transmission.

Your 1967-1969 Automatic Mustang is past-due for a few modern touches. Update those terrible drum brakes with this Front Power Disc Brake Conversion Kit with Power Master Cylinder, now available to purchase here at CJ Pony Parts!

Conversion Kit Includes:
- Pair of Dual Piston Calipers
- Pair of Standard Rotors
- Pair of Caliper Brackets
- Front Brake Pads (Pre-Installed)
- Pair of Rubber Brake Hoses
- Wheel Bearings
- Seals
- Pair of Dust Caps
- Mounting Hardware
- Pair of Dust Shields
- 9" Brake Booster (Powder Coated Black)
- Automatic Disc Brake Pedal with Pedal Pad
- Firewall Bracket
- Dual Bail Master Cylinder
- Master Cylinder Lid
- Disc/Drum Proportioning Valve Kit With Bottom Mount Bracket With Brake Light Switch Warning Plug
- Master Cylinder to Proportioning Valve Brake Lines

*This Master Cylinder will work with Disc Front Brakes and Drum Rear Brakes
*The smallest wheel you can install on this Disc Brake Conversion kit is a 14"x7".

CJ's has sourced absolutely everything you'll need to convert your pony's original drum brakes to more modern power disc brakes! This complete kit includes a 9" brake booster, automatic disc brake pedal with pedal pad and a dual bail Master Cylinder. It also includes new high-quality dual piston calipers, rotors, pre-installed brake pads and all of the hoses and hardware you'll need for this big project. Don't waste time and money sourcing each individual part you'll need for your brake conversion--we've already done the hard part for you! Order your full conversion kit from CJ's now!

Vehicle Fitment: This conversion kit is intended for 1967-1969 Mustangs with V8 Drum Spindles.

Whether you’re looking for an exterior mirror, wheels and tires, headlights and taillights or a set of interior upholstery, CJ Pony Parts has the parts you need to complete your classic Mustang restoration with ease! CJ’s is proud to offer thousands of reproduction and aftermarket parts to help bring your early model Mustang build back to life--browse our huge selection of restoration parts for your pony today!

Order this complete Front Power Disc Brake Conversion Kit with Power Master Cylinder for your 1967, 1968 or 1969 Mustang with an Automatic Transmission today from CJ Pony Parts!

Vehicle Fitment

This product will fit the following Mustang years:

Rated 5 out of 5 by from Easy Install, Good Quality Parts & Good Value! I purchased this kit initially because the price was the best that I had seen. I received it sooner than I expected and was pleasantly surprised at the quality of
Date published: 2019-07-11
  • y_2019, m_10, d_17, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_DBF194, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.23ms
  • REVIEWS, PRODUCT

Can this be used on a 67 inline 6?

Asked by: Mustangmike
No it cannot. You will need a kit that works with 6 cylinder spindles.
Answered by: rk cjpp
Date published: 2019-05-02

I have 15” Cragger mags. Will this kit work?

Asked by: Griff
The smallest wheel you can install on this Disc Brake Conversion kit is a 14"x7".
Answered by: rk cjpp
Date published: 2019-01-04

I have the original steel rims on my 1968 coupe automatic. Will they work with this kit?

Asked by: BigDan
The smallest wheel you can install on this Disc Brake Conversion kit is a 14"x7".
Answered by: rk cjpp
Date published: 2018-12-18
  • y_2019, m_10, d_17, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_DBF194, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 108.97ms
  • QUESTIONS, PRODUCT