Gauge Support 1965-1966

CJ's Part Number: GS
CJ's Low Price:
$50.99
1508198400 16214
Earn 50 RPM Points What's this?
Gauge Support 1965-1966
Gauge Support 1965-1966 Gauge Support 1965-1966 Gauge Support 1965-1966 Gauge Support 1965-1966 Gauge Support 1965-1966

Product Description

Allows the installation of Autometer or aftermarket style gauges to be used with a factory instrument bezel.

Accepts four 2" gauges and one 3-3/8" gauge.

Similar Mustang Parts

similar Mustang parts More Instrument Panel Area  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
Gauge Support 1965-1966 is rated 2.4 out of 5 by 5.
Rated 1 out of 5 by from poor Quality The gauges fit is way to tight and the fuel gauge sits about 1/8 to 3/16 of an inch to far to the left and doesn't look right, I have bought one of these front another vendor for another project and it was great. Unfortunately this is not quality!
Date published: 2016-04-03
Rated 1 out of 5 by from very poor fit Gauges do not center in bezel, had to be modified for turn signal lamp sockets to fit, unclear whether to use clear lens or not. Unless you plan on modifying the product to fit correctly don't buy this. Especially at $50.
Date published: 2016-04-21
Rated 5 out of 5 by from Gauges fit fine Don't know if these other reviewers got a bad mold or what but my gauges fit nice and centered. Helps keep from drilling holes all over the dash to mount aftermarket gauges
Date published: 2017-07-28
Rated 4 out of 5 by from gauge support Look like it can do the job holds gauges firm and I don't think they will move. Just wish the had include the screws with it I would have given a excellent rating.
Date published: 2017-07-27
Rated 1 out of 5 by from Terrible fit Speedo doesn't fit, the gauge support is too tight and won't allow it to fit correctly. This is useless for me.
Date published: 2017-03-07
  • y_2017, m_10, d_15, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_GS, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 6.38ms
  • REVIEWS, PRODUCT

Product Questions

Do you sell the screws to attach this support. I bought one but I don't have any screws to fasten it to my new bezel I bought. I don't want to use the wrong screws and break it.

Asked by: Draco
You will need to use screws from an original instrument bezel, the ones that attach the metal cluster to the bezel, we do not offer them new.
Answered by: rk cjpp
Date published: 2016-03-09

would it be possibe to squeeze a 2 1/16" gauge in the smaller holes? 

Asked by: equium
Well I checked the AutoMeter gauges, and they are all 2 1/16" !  I ordered this product, but can you tell me then where I can find gauges which fit in this gauge support?
Answered by: Kurt66
Date published: 2017-02-06

Will the facotry speedo fit in the large center hole?

Asked by: equium
NO, I have already tried. This support is for after market Gauges.
Answered by: RaymanB
Date published: 2017-06-27

Hello. What is the diameter of the mounting hole for the speedometer? Respectfully.

Asked by: gtponycar
  • y_2017, m_10, d_15, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_GS, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 6.96ms
  • QUESTIONS, PRODUCT

You Might Also Like