Gibson Axle-Back Exhaust System 2-1/2" Aluminized Dual Exit With 3-1/2" Polished Tips Jeep Wrangler JK 2007-2018
- Increases Horsepower
- Deep Exhaust Tone
- Stainless Steel Tips
- Bolt On Installation
Gibson 2-1/2" Dual Exit Aluminized Axle-Back Exhaust System with 3-1/2" Polished Tips for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.
This stylish 2-1/2" Dual Exit Aluminized Axle-Back Exhaust System with 3-1/2" Polished Tips from Gibson Exhaust will increase your 2007-2018 Jeep JK Wrangler's power while giving it an aggressive exhaust tone with a slight interior drone. All of the necessary hardware you will need as well as factory style hangers are included with your purchase for a simple bolt-on installation!
Features and Benefits of the Gibson 2-1/2" Dual Exit Aluminized Axle-Back Exhaust System with 3-1/2" Polished Tips (17303):
- Constructed from premium quality aluminized steel
- Mandrel-bent tubing
- 3-1/2" polished T304 stainless round slash-cut tips
- Straight out of the back dual exit
- Baffled, chambered muffler
- Aggressive exhaust sound with minimal interior drone
- Includes all required hardware
- Comes with factory style hangers
- Straightforward bolt-on installation
- Manufactured in the USA
As a Jeep enthusiast, you need power from idle to 3000 RPM. That's why Gibson Exhaust designed this JK axle-back exhaust kit to enhance low and mid-range power for climbing and towing. This split rear exhaust exits straight out the back and features dual large diameter stainless steel tips. Gibson Exhaust crafts this system in the USA from premium quality aluminized steel with all mandrel-bent tubing. The baffled, chambered muffler will give your JK an aggressive exhaust tone with a slight interior drone.
Gibson Performance is the industry’s leading manufacturer of street-legal, high-performance exhaust systems for SUVS and trucks, as well as diesel and off-road vehicles. Gibson Exhaust offers some of the most cost-effective, reliable and trouble-free power producing systems on the market.
Order Gibson's 17303 2-1/2" Dual Exit Aluminized Axle-Back Exhaust System with 3-1/2" Polished Tips for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Novice skill is required for this installation.
Tools you will need for this installation: 3/8 ratchet, 15-millimeter socket, a 1/2-inch socket, 9/16 socket, a 1/2-inch wrench, and you might need an exhaust hanger removal tool. This axle back exhaust is going to be super easy to install. There's only one 15- millimeter nut holding it on. Then you just have to remove the muffler from the two rubber hangers. We'll remove the 15- millimeter nut on the exhaust clamp. Now we're going to remove this bracket from the rubber hanger on the Jeep. All right, now we can move to the other hanger. Once both hangers are disconnected, grab onto the muffler and twist it to break it loose from the pipe. Then you can pull it off. With the factory system out of the way, the first thing we're going to do is put a clamp on the over axle pipe.
Grab the muffler assembly and install it onto the over axle pipe, then get it on the driver's side hanger, and then get it on the passenger side hanger, and tighten down the clamp. Then tighten the clamp with a 9/16 socket. Install each tip with the provided hardware, adjust them to your liking, and then tighten them with a 1/2-inch wrench and socket, and your installation's finished. All right, let's hear it. Our Gibson axle back exhaust is installed, fit and finish is spot on. It looks great. I'm loving the dual tips. It sounds pretty good too, but it's not too loud. Installation was super easy. It's only going to take about 30 to 45 minutes and before you know it, you'll be heading off-road.