Gibson Axle-Back Exhaust System 2-1/2" Extreme Ceramic Dual Exit Black With 4" Tips Jeep Wrangler JK 2007-2018
Gibson 2-1/2" Dual Exit Black Ceramic Extreme Axle-Back Exhaust System with 4" Tips for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.
Give your 2007-2018 Jeep Wrangler JK an aggressive appearance and sound with this 2-1/2" Dual Exit Black Ceramic Extreme Axle-Back Exhaust System with 4" Tips from Gibson Exhaust. This bold, stylish and durable exhaust kit is easy to install and will provide your JK with increased power!
Features and Benefits of the Gibson 2-1/2" Dual Exit Black Ceramic Extreme Axle-Back Exhaust System with 4" Tips:
- High-temperature black ceramic coated exhaust system
- Mandrel-bent tubing
- 4" round rolled edge slash-cut exhaust tips
- Exits behind each rear tire
- Baffled, chambered muffler
- Aggressive exhaust sound with minimal interior drone
- All necessary hardware is supplied
- Includes factory style hangers
- Easy bolt-on installation
- Crafted in the USA
Gibson Exhaust manufactures this axle-back kit in the USA and designs it to enhance your JK's low and mid-range performance for climbing and towing. The high-temp black ceramic coated dual extreme rear exhaust exits behind each rear tire. This provides plenty of ground clearance for driving on and off-road. The dual large diameter rolled edge black ceramic exhaust tips offer superior performance and style. All of the required hardware, as well as factory style hangers, are included with your purchase for a straightforward bolt-on installation!
Gibson Performance is the industry’s leading manufacturer of street-legal, high-performance exhaust systems for SUVS and trucks, as well as diesel and off-road vehicles. Gibson Exhaust offers some of the most cost-effective, reliable and trouble-free power producing systems on the market.
Order Gibson's 17306-B 2-1/2" Dual Exit Black Ceramic Extreme Axle-Back Exhaust System with 4" Tips for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Novice skill is required for this installation.
Tools you'll need for this installation: 3/8 ratchet, 15 millimeter socket, 1/2 inch socket, 9/16 socket, 1/2 inch wrench, and you might need an exhaust hanger removal tool.
This axle back exhaust is going to be super easy to install. There's only 1, 15 millimeter nut holding it on, then you just have to remove the muffler from the 2 rubber hangers. Remove the 15 millimeter nut on the exhaust clamp. Now we're going to remove this bracket from the rubber hanger on the Jeep. All right, now we can move to the other hanger. Once both hangers are disconnected, grab onto the muffler and twist it to break it loose from the pipe, then you can pull it off. With the factory exhaust out of the way, you can install the provided clamp on the over axle pipe. Grab the muffler assembly and slide it onto the over axle pipe, then the driver's side hanger, then the passenger side hanger. Then install it into the passenger side hanger. Slide the clamp over the inlet pipe, then tighten it with a 9/16 socket. Install the hardware on each tip then install each tip on the tail pipes. Position the tips where you like them then tighten the bolts with a 1/2 wrench and 1/2 inch socket. You're installation's finished.
All right, let's hear it. Our Gibson Dual Extreme Axle Back Exhaust is installed. The corner exits give it a nice aggressive look and sound. Installation was super easy. It's only going to take about 30 to 45 minutes and before you know it, you'll be heading off road.