Coilovers are the easiest suspension to adjust, and the best performing on the track! Give your Mustang a simple and impressive front-end setup with these coilover systems from Global West.
Features and Benefits:
- Single Adjustable Coilovers
- Fully Assembled Upper / Lower Arms
- Billet Aluminum Mounts
- Adjustable Strut Rods Aid Caster Tuning
This Global West coilover suspension system is available in a few different configurations. The G+ version is designed for street and drag racing applications. The negative roll version is designed for road racing and performance street handing. Stock brakes, drum or disc, can be used. Racing brakes are also not a problem.
Single adjustable coilovers offer a convenient balance between performance and simplicity. Upper and lower control arms are fully assembled. Top-of-the-line Del-a-lum bushings are used in the upper arms and spherical Teflon-lined bearings are used in the lowers. Threaded ball joints are used top and bottom.
Global West coilover kits maintain factory suspension loads in the shock tower, from the bottom up. No cutting of the shock tower is required. Installation requires drilling a total of 6 holes for the drag / street version and 10 holes for negative roll / road racing system. Drill templates are included.
Adjustable strut rods make caster adjustment simple. Our strut rods have a special clevis that indexes in the frame making it impossible for improper installation. Eccentric lockout kits eliminate the lower cam bolts. The cam bolts can slip during hard cornering altering your alignment. Our new lockout kits offer 6 adjustments for camber rather then one.
Billet aluminum upper mounts are standard. Special steel lower mounts install on the lower arm to maximize spring and shock performance.
Needle bearing kits are standard with our coilover kits. Needle bearings go between the lower adjuster and the spring. Needle bearings to reduce drag when adjusting ride height. Hardware is included along with instructions and alignment specifications.
- Lowering the ride height 1 inch places the shock in the middle of its travel.
- All Components are shipped in black powdercoat. The red is for display purposes only.