Grille/Tailgate Emblem Ford Billet Gloss Black F-150 2015-2017

CJ's Part Number:
76% of 100


  • Officially Ford Licensed
  • Gloss Black Finish
  • Direct-Fit Replacement
  • Billet Aluminum Construction
MSRP $76.95
You save 12%

Gloss Black Billet Grille or Tailgate Ford Emblem for 2015, 2016 and 2017 F-150s.

Are you looking for something to change the appearance of your 2015-2017 F-150? Well, take a look at this Gloss Black Billet Grille or Tailgate Ford Emblem from CJ Pony Parts! This emblem replaces either the front grille emblem or tailgate emblem on your F-150 for a custom blacked-out style.

Features and Benefits:
- Sold Individually
- Gives your F-150 a Blacked-Out Custom Look
- Constructed from T-6061 Aircraft Grade Billet Aluminum
- Gloss Black Finish
- Direct Replacement for Factory Emblem
- Replaces Front Grille or Rear Tailgate Emblem
- Includes Necessary Installation Hardware

This Ford emblem is sold individually and will fit in the factory emblem location of either your front grille or tailgate. Purchase two emblems for a complete matching set! The high-quality construction of the emblem from T-6061 aircraft grade billet aluminum ensures this emblem is built with the endurance to last on your truck for many miles on, or off the road. This emblem is a direct replacement for the factory emblem and comes in a sleek gloss black finish that will bring a custom touch to your F-150. Easing the installation, all the required hardware is included.

*This emblem will NOT fit Limited or Platinum model F-150s.

California Residents: Proposition 65 Warning

Installation Difficulty


Novice skill is required for this installation.

Installation Videos

Video Transcript

Today on CJ Off-Road, we're going to add some black to the rear of our 2016 F-150 to give it a nice custom look.

Chrome isn't for everyone and the tailgate emblem on the rear of our F-150 is a bit boring. So, today we're going to give our F-150 some character by installing this gloss black Ford emblem on the tailgate. This is an official Ford licensed emblem designed to fit the grille and tailgate of your 2015 to '17 F-150. It's made of high quality T-6061 billet aluminum with a gloss black finish, and it'll directly replace the factory emblem for a bit of contrast and a nice blacked-out look. To learn even more about this product and the pricing, click the link in the description. Now let's get to the install.

Tools you'll need for this installation, T24 Torx bit, flat head screwdriver, you might need angled needle nose pliers, a 7/64 hex key, and a 3/8 wrench.

All right. This tailgate emblem is pretty simple to replace. All we have to do is open up the tailgate. Then, remove the eight T25 Torx screws securing on this panel right here and set the panel aside. So, here is the tailgate emblem on the back side of the trunk. There's four clips that secure it to the tailgate. We just need to press on these clips and then the emblem will pop out. Okay. We got the emblem out. It was a bit challenging because there's adhesive on the back that holds it in with the clips, but with some patience and angled needle nose pliers, we got it out.

Okay. Now we have our new emblem. We're going to install the provided studs onto it. For the tailgate, you're going to install the two studs in this square section here, have them diagonal from each other ... doesn't matter where, just have them diagonal from each other. For the grille, you would install them on these outside holes. Use an Allen key to tighten them down.

Place the emblem into the tailgate. Then install a washer over each stud. Then install your nuts. Then tighten the nuts with a 3/8 wrench. All right. Before you get the emblem completely tightened down, make sure your alignment's good. Then once you have it nice and centered and flush, you can reinstall the panel right here, and our install is complete.

Okay. We got our gloss black tailgate emblem installed on our F-150. I think it adds a really nice touch to the truck. It goes well with the red paint. Getting the factory one off was a bit tricky because of the adhesive that was on the back, but it shouldn't take you more than 30 to 45 minutes to do this, and before you know it, you'll be heading off-road.

Vehicle Fitment

This product will fit the following F-150 years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.