This Set of HPS Rear Brake Pads (P/N: HB803F.639) from Hawk Performance are world renowned for increasing stopping power and will be the perfect addition to your 2015 EcoBoost equipped with the Performance Pack, Base Model GT or 2016-2020 Mustang GT equipped with the Performance Pack!
Increasing the performance of your Mustang's braking system is easy when you choose Hawk Performance's HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of aerospace and motorsports severe-duty friction technology. The High Performance Street compound offers a higher coefficient of friction over stock Mustang brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement Mustang brake pads. Less fade means you'll have a highly durable brake pad with less brake dust.
- 2015 EcoBoost Mustangs Equipped with the Performance Pack Option
- 2015 Base Model GT Mustangs
- 2016-2020 GT Mustangs Equipped with the Performance Pack Option
Features and Benefits:
- Complete Rear Set for Driver and Passenger Sides
- Extended Pad Life with Low Levels of Brake Dust
- Increased Stopping Power while being Gentle on Rotors
- Virtually Noise-Free with High Friction Hot or Cold
- Made in the USA
Please Note: These will NOT fit 2015-2017 V6 Mustangs, 2015-2020 Base Model EcoBoost Mustangs, 2015 GT Mustangs Equipped with the Performance Pack Option and the 2015-2020 Shelby GT350 or GT350R.
Tech Tip: Hawk Performance burnishes its brake pads as a final step in the factory, but all brake pads have to be bedded-in with the rotors (new or used) that they will be used against. Properly bedding-in new brake pads results in a transfer film being generated at the pad and rotor interface to maximize brake performance.
When searching for a new set of high-quality brake pads, there is no brand better than Hawk Performance. Hawk Performance specializes in producing the most durable, reliable brake pads that are able to improve the stopping power of all years of Mustangs, both early and late model. By upgrading your Mustang's worn out brake pads with a set of Hawk Performance brake pads today, you will give your early or late model Mustang greater stopping power, minimal brake dust development and a reduction in brake noise.
Manufacturer Part Number: HB803F.639