Holley Super Sniper EFI 4150 Self-Tuning Kit 650HP With Black Finish
- Supports Up To 650HP
- Includes 100Lb Fuel Injectors
- Great For Forced Induction
- Self Tuning ECU
Holley 650 Horsepower Super Sniper 4150 EFI Self-Tuning Kit with a Black Finish.
If you're ready convert your carbureted turbo engine to a more efficient and modern EFI system, than this complete Holley 650 Horsepower Super Sniper 4150 EFI Self-Tuning Kit with a Black Finish (550-519) is exactly what you'll need to get your project started! Don't hesitate and order your kit from CJ Pony Parts today!
Holley Super Sniper Self-Tuning Kit Features:
- Four 100 Lb/Hr Injectors
- Compatible with Draw-Thru or Blow-Thru forced induction applications
- Aggressive Black Finish
- User-friendly Boost Control with handheld adjustability
- Programmable Target Air Fuel Ratios per Boost level
- Advanced boost control is available via free Sniper EFI tuning software, including Boost vs RPM and Boost vs Time
- 2.5 Bar MAP sensor included which safely works on applications up to 21.5 PSI
- Built-in Single stage progressive nitrous control
- Dry or Wet Nitrous Support
- Progressive or Non-Progressive control strategies
- Lean/Rich AFR Cutoff
- Integrated ignition timing control for precise timing curves
- Three Programmable 0-5V Sensor Inputs for Oil/Fuel/Dome or Nitrous Pressure Sensors
- Six Programmable Ground Outputs
- Internal fuel pressure regulator eliminates the hassle of plumbing an external fuel pressure regulator (Preset to 58.5 PSI) for N/A or Nitrous applications
- Self-tuning ECU means you don’t have to be a computer/tuning wiz to have EFI
- Only 4 Wiring Connections Required! (Battery +, Battery-, Switched Ignition & RPM)
- High-Resolution Full Color Touchscreen for initial Setup, Tuning, and Gauge Displays
- Simple Calibration Wizard--no laptop required
- The included Genuine Bosch LSU 4.9 Wideband Oxygen Sensor provides real-time Fuel Map Learn
- Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor installation, with Stainless Steel T-Bolt clamps and a Stainless Steel oxygen sensor flange
- Throttle body mounted ECU--no extra boxes to mount
- USB to CAN Communication cable included for easy laptop tuning of advanced controls
- Dual Pattern bolt on carburetor replacement, designed to fit 4150 Flange & Spread Bore manifolds
- Compatible with Holley EFI analog gauges and electronic dashes
*This EFI self-tuning kit is also available with a polished (HSEFI2) or gold (HSEFI6) throttle body.
It can be pretty daunting to start a huge project like an EFI conversion, but that's exactly why Holley designed this brand-new Super Sniper EFI Self-Tuning kit! You'll have practically everything right at-hand to start your project, and the self-tuning feature means that you won't have to worry about learning some complicated computer system to calibrate your new system. Your new self-tuning kit is centered around a stunning Black throttle body with features four (4) 100 lb/hr injectors, the perfect base to your system to support up to 650HP in forced induction or dry nitrous applications. Holley designed the Super Sniper system with a USBN to CAN tuning cable, which gives you unlimited control of your engine and even supports full nitrous control, so you'll be the mastermind under your hood. What are you waiting for? Snag your new EFI self-tuning kit today from CJ's!
Super Sniper 4150 Kit Includes:
- Holley Sniper EFI 4150 Throttle Body
- High Resolution Full Color Touchscreen Tablet
- Main Harness and Ignition Adapter
- Output Harness
- Bosch LSU Wideband Oxygen Sensor
- Clamp on Oxygen Sensor Kit
- Holley Sniper EFI Software
- Coolant Temperature Sensor
- Air Cleaner Gasket & Flange Gasket
Throttle Body Specs:
Flange Style: 4150
Injector Size: 100 lb/hr @58.5 PSI
Inlet/Outlet Size: 9/16-18 Female O-Ring (AN 6)
Map Sensor: 2.5 Bar
Max Horsepower Rating: 650 Forced Induction
Throttle Bore: 1-11/16”
Please Note: This EFI Kit will require the use of an electric high-pressure fuel pump, this kit will not work with a mechanical fuel pump. For 1965-1968 Mustang applications we recommend using (FTKEFI10) and for 1969-1970 Mustang applications we recommend using (FTKEFI11).
The Holley Motor Company became official in 1903 when Henry Ford persuaded the owners to enter the carburetor business and supply his growing automobile business with fuel system parts. As of today, Holley remains one of the four parts suppliers who still sell to Ford after all these years. With more than a century of experience and an assortment of products available from CJ Pony Parts, you know you're getting the best!
Go ahead and order this complete Holley (550-519) 650 Horsepower Super Sniper 4150 EFI Self-Tuning Kit with a Black Finish now from CJ Pony Parts!
California Residents: Proposition 65 Warning
Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:
- 1965 and older U.S. manufactured California certified vehicles
- 1967 and older U.S. manufactured federally certified vehicles
Advanced skill is required for this installation.
This product will fit the following Bronco years:
This product will fit the following C10 years:
This product will fit the following F-100 years:
This product will fit the following Mustang years: