Hood Insulation 1969-1970

CJ's Part Number: HDI
CJ's Low Price:
1508457600 17036
Earn 39 RPM Points What's this?
Hood Insulation 1969-1970
Hood Insulation 1969-1970 Hood Insulation 1969-1970 Hood Insulation 1969-1970 Hood Insulation 1969-1970

Product Description

Hood Insulation for all 1969-1970 Mustangs.

Many owners that have a 1969-1970 Mustang usually forget that their Mustang was equipped with hood insulation. Install this hood insulation on your Mustang and notice how much better your Mustang will perform. This is also a great way to ensure your classic Mustang will look as original as possible. The hood insulation has the correct precut mounting holes so installation is a breeze.

When you install this insulation you will notice that your Mustang will have better warm up times so you won’t have to wait and let it warm up. Another benefit when installing the hood insulation is that it absorbs engine noise. The hood insulation gets mounted to the hood by 10 hood insulation retainer clips allowing a tight secure hold.

*Does not include hood insulation retainer clips

The material that was used in the original hood insulation is used in this hood insulation. So you know you will have the best protection and performance out of the insulation. This is cheap insurance to have on your Mustang and a great way to freshen up under the hood of your 1969-1970 Mustang.


Similar Mustang Parts

similar Mustang parts More Hood Insulation  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
Hood Insulation 1969-1970 is rated 4.3 out of 5 by 3.
Rated 5 out of 5 by from Good fit and look, worth it. I bought this to protect my new paint and give a clean look under the hood. Used with the clips (separate purchase) and it fit well. I had to cut out for the hood scoop turn signals so the wiring looked better and cleared the insulation, but that was simple. Use gloves, this is fiberglass. Glad I installed this.
Date published: 2015-06-24
Rated 4 out of 5 by from Title was very correct I am a repeat customer on this item. Look like this one was cut a little different. I tried to make it work.
Date published: 2017-02-10
Rated 4 out of 5 by from Fits well Holes all lined up, but instal with fluffy side facing engine means doesn't look so good
Date published: 2016-01-01
  • y_2017, m_10, d_18, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_HDI, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 44.44ms

Product Questions

Hi, instructions with item indicted that for a mustang insulation skin should go toward hood, which i presume means against the underside of hood leaving insulation facing engine. This seems goofy. Can you confirm if these instructions are correct 

Asked by: RobZee
That is what the manufacturer recommends.
Answered by: CJPP Dave
Date published: 2016-01-06

Can it be used on hoods that has a shakeri? Is there a cutting pattern i can follow if I purchase this?

Asked by: Exntid
This is not intended to be used with shaker hoods.
Answered by: CJPP Dave
Date published: 2017-06-27

When will the Hood Insulation Clips 10 1969-1970 and hood insulation pad be available????? Thank you.

Asked by: David M
They are available part #HW401.
Answered by: rk cjpp
Date published: 2015-10-22

Did shaker hood Mustangs use hood insulation?

Asked by: 2006flhxchris
  • y_2017, m_10, d_18, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_HDI, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 46.45ms

You Might Also Like