Hood Mounted Tachometer Black Face 1965-1970

Scott Drake:
C8AZ-17A326-B
Hood Mounted Tachometer Black Face 1965-1970 is rated 3.0 out of 5 by 2.
  • y_2019, m_10, d_19, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_TACH2, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 210.7ms
  • REVIEWS, PRODUCT

Highlights

  • Black Plastic Housing
  • 8,000RPM Dial W/Red Pointer
  • Mounts On The Hood
  • Visible Through The Windshield
MSRP $411.95
$370.76
You save 10%

Scott Drake Hood Mounted Tach with a black face for all 1965-1970 Mustangs.

Features a black plastic housing with an 8,000 Rpm black dial and red pointer. It is designed to be mounted on the driver side of the hood so that it is visible through the windshield. The bright back lit display makes this a great accessory.

Installation Difficulty

Moderate
Moderate

Intermediate skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

Rated 1 out of 5 by from Awful I bought it about a month and a half ago....couldn't get it to work.Hooking it up to my 6al box may have even damaged the tachdrive.returned it about 3 or 4 weeks ago.Can't get any news on my return.I have never had so much trouble just getting a tach to work.Sorry I bought it, and now I have 3 holes in my hood.
Date published: 2018-04-20
Rated 5 out of 5 by from My Review for Hood Mounted Tachometer Black Face 1 Used it on my 73 conv. Works great - easy to see Right in front of you
Date published: 2019-03-30
  • y_2019, m_10, d_19, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_TACH2, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.53ms
  • REVIEWS, PRODUCT

HI,I BUILT A CUSTOM 2014 MACH1.I JUST FOUND OUT THAT 69 AND 70 MACH1'S WHEN BOUGHT HAD TACHS SENT WITH THE CARS AND INSTALLED BY DEALERS IF THE PERSON WANTED THEM.I NEED A HOOD TACH THAT WILL WORK ON THIS CAR ANY IDEAS

Asked by: MARTY
You would need some sort of tach adapter to allow your cars signal to work with this tach.
Answered by: rk cjpp
Date published: 2019-09-06

 I just installed the hood tachometer 19 70 Mach1 .  I cannot get the tactk to    idal over 2000 when I  rib up the engine  . Made sure It was Set to V8 status . thanks for any help 

Asked by: Fk1969
Double check the setting and wiring.
Answered by: rk cjpp
Date published: 2018-08-27

I WANT TO INSTALL A TACHOMETER ON MY 68 FASTBACK, DEBATING TO PUT IT ON THE HOOD . WHAT OTHER TACKS DO YOU OFFER OTHER THAN HOOD MOUNTED? IM LOOKING FOR A TACHOMETER MADE IN THE U.S..

Asked by: JERRY GTZ
Sorry we do not offer any other tach.
Answered by: rk cjpp
Date published: 2019-02-28

can I get mounting hardware/gasket & instuctions as this hood tach has 3 wires black, red, green, thanks

Asked by: tlbgroup
We do not offer a gasket/ mounting hardware kit. If you scroll down the parts page the instructions can be found below the product description.
Answered by: rk cjpp
Date published: 2017-03-01

Will this work with MSD 6 ignitions?

Asked by: Airjack
Yes it will.
Answered by: rk cjpp
Date published: 2016-04-22

Is there a specific location this tach is placed on the hood of 1970 Mustang with some type of template?  Also how difficult is it to install and wire it up?  And why is the black face Tach more expensive? 

Asked by: Beaufort1
Since this was a dealer installed tach there really isn't any correct mounting location, it is not difficult to wire, power, ground, tach signal and parking light wires. I do not know why one is more expensive than the other.
Answered by: rk cjpp
Date published: 2019-03-06

Are these tachometers compatible for use on more contemporary vehicles; for example, will it work if installed on a 2001 Crown Vic?

Asked by: pewf
I doubt it would be compatible. You might be able to get it to work through a customized installation, but we can't comment on how you'd go about it, or whether it would actually work.
Answered by: CJ Pony Parts
Date published: 2017-01-27

will this work with "PERTONIC FLAMETROWER SERIES INGITION SYSTEMS ???

Asked by: tcom1002
Yes.
Answered by: CJ Pony Parts
Date published: 2017-01-27
  • y_2019, m_10, d_19, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_TACH2, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 103.41ms
  • QUESTIONS, PRODUCT