Hooker Long Tube Headers 1-5/8" Competition Ceramic Coated 289/302 1965-1973/351W 1967-1973

Hooker:
6901-1HKR
Hooker Long Tube Headers 1-5/8" Competition Ceramic Coated 289/302 1965-1973/351W 1967-1973 is rated 2.0 out of 5 by 1.
  • y_2020, m_5, d_31, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_EXHD52, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 151.53ms
  • REVIEWS, PRODUCT

Highlights

  • 1-5/8" Primaries
  • 5/16" Machined Flange
  • Mandrel Bent 16 Gauge Tubes
  • Ceramic Coated Finish
MSRP $515.95
$473.95
You save 8%

Hooker Ceramic Coated Competition 1-5/8" Long Tube Headers for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a 289 or 302 Engine and 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a 351W Engine.

Are you looking for a set of Long Tube Header for your 1965-1973 Mustang that looks great and performs like they should? Look no further then these high quality Ceramic Coated Long Tube Headers from Hooker. These Hooker headers 6901-1HKR are made from 16-gauge mild steel tubing, mandrel bent steel and offers added clearance in your Mustangs Engine bay.

Hooker's Long Tube Headers 6901-1HKR are constructed from high grade 16-gauge, mandrel bent 1-5/8" tubing which gets welded to a 5/16" machined flanges for unrivaled performance and quality. This will provide a near excellent fit, and finish. After each header is fully welded, they are then finished off with a high quality Ceramic Coating that shines just like chrome.

Long Tube Headers Feature:
- Mandrel Bent, 16-Gauge, 1-5/8" Tubing
- Mild Steel Construction
- 5/16 Machined Flange
- Easy Installation
- High Quality Ceramic Coating
- Includes Gaskets and Brackets

Please Note: This set of Hooker Long Tube Headers will not work on 1971-1973 Mustangs with a Manual Transmission.

*A Custom-Made Intermediate Pipe and Mid-pipe is required when installing these headers
*Will fit Power Steering if you use the slave cylinder lowering bracket.

The famous Hooker heart logo is among the most recognized in the performance aftermarket. It is a symbol of unmatched performance and quality. For more than half a century, Hooker has been manufacturing top quality headers and related products that are widely considered among the best in the industry. CJ Pony Parts offers a wide selection of premium Hooker products that are the perfect choice for your vehicle. Browse around and place your order with CJ’s today!

Purchase a new set of Hooker Ceramic Coated Competition 1-5/8" Long Tube Headers 6901-1HKR for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang with a 289 or 302 Engine or 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang with a 351W Engine from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Difficulty

Moderate
Moderate

Intermediate skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

Rated 2 out of 5 by from poor fit this product did NOT fit my 1969 351w Mach 1. They hit the frame rail on the drivers side down low and could not bolt to the head. Went directly to Hooker. They were a big help. Had me ship them back. They confirmed they were not bent correctly. Sent me a new set. They were better. They did bolt up but still so close to the frame that I would say they probably touch. But they did bolt up. Look great. Performance is worse than stock. But have not tuned the carb to the new headers. So after I do I expect great performance.
Date published: 2017-09-27
  • y_2020, m_5, d_31, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_EXHD52, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.47ms
  • REVIEWS, PRODUCT

Will these headers clear the floor pan in a 1968 Mustang with a 351 Windsor installed? I've had others that hit the floor pan because of the taller deck height of a 351 Windsor

Asked by: Bjarra
Yes they should.
Answered by: rk cjpp
Date published: 2019-08-12

will these fit a 73 convertible 302, which I will later swap to a 351 Windsor?

Asked by: Boz1
Yes, Please Note: This set of Hooker Long Tube Headers will not work on 1971-1973 Mustangs with a Manual Transmission. *A Custom-Made Intermediate Pipe and Mid-pipe is required when installing these headers *Will fit Power Steering if you use the slave cylinder lowering bracket.
Answered by: rk cjpp
Date published: 2019-06-30

do these fit 1973 Ford mustang mach 1 fast back 351 cleveland 4V Q-code engine

Asked by: miko447
They will not fit the Cleveland. Here are some links top the ones that will. https://www.cjponyparts.com/hooker-long-tube-headers-1-3-4-competition-ceramic-coated-4-barrel-351c-1971-1973/p/EXHD58/, https://www.cjponyparts.com/patriot-exhaust-long-tube-headers-ceramic-coated-1-3-4-4bbl-351c-1971-1973/p/EXHD35/, https://www.cjponyparts.com/patriot-exhaust-long-tube-headers-uncoated-1-3-4-4bbl-351c-1971-1973/p/EXHD34/, https://www.cjponyparts.com/flowtech-long-tube-headers-ceramic-with-1-3-4-inch-primaries-4-barrel-351c-1970-1973/p/EXHD91/
Answered by: rk cjpp
Date published: 2019-04-04

Will these fit my 1969 mustang coupe. 302 4 barrel Manuel trans

Asked by: Sweetween
Yes. *A Custom-Made Intermediate Pipe and Mid-pipe is required when installing these headers *Will fit Power Steering if you use the slave cylinder lowering bracket.
Answered by: rk cjpp
Date published: 2019-03-11

Will these headers fit a 1978 Mustang 2 302

Asked by: Danielmorrison
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Answered by: jmg1
Date published: 2018-11-07

Will these fit a 98 mustang cobra

Asked by: Panda378
No they will not.
Answered by: rk cjpp
Date published: 2018-08-20

Will these fit a 1967 with a 351w c4 trans and power disc brakes, if so is there anything else I need to install

Asked by: Spankit
Yes, these are listed as fitting your application. If your car has power steering use this bracket, https://www.cjponyparts.com/scott-drake-slave-cylinder-lowering-bracket-1965-1970/p/SCB/. A Custom-Made Intermediate Pipe and Mid-pipe is required when installing these headers.
Answered by: rk cjpp
Date published: 2018-02-22

Will these fit a 67 mustang coupe with a 302 and 4 speed?

Asked by: Mattgg93
Yes.
Answered by: rk cjpp
Date published: 2020-04-18
  • y_2020, m_6, d_1, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_26
  • loc_en_US, sid_EXHD52, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 113.51ms
  • QUESTIONS, PRODUCT