Hooker Long Tube Headers Competition Ceramic Coated 289/302 1965-1973/351W 1967-1973

Hooker Headers: 6901-1HKR
MSRP: $475.95
CJ's Low Price:
$427.95
1508198400 13049
Based on your selection, you may be interested in the following items.
Earn 427 RPM Points What's this?
Hooker Long Tube Headers Competition Ceramic Coated 289/302 1965-1973/351W 1967-1973
Hooker Headers

Product Description

Hooker Ceramic Coated Competition Long Tube Headers for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a 289 or 302 Engine and 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a 351W Engine.

Are you looking for a set of Long Tube Header for your 1965-1973 Mustang that looks great and performs like they should? Look no further then these high quality Ceramic Coated Long Tube Headers from Hooker. These Hooker headers 6901-1HKR are made from 16-gauge mild steel tubing, mandrel bent steel and offers added clearance in your Mustangs Engine bay.

Hooker's Long Tube Headers 6901-1HKR are constructed from high grade 16-gauge, mandrel bent 1-5/8" tubing which gets welded to a 5/16" machined flanges for unrivaled performance and quality. This will provide a near excellent fit, and finish. After each header is fully welded, they are then finished off with a high quality Ceramic Coating that shines just like chrome.

Features:
- Mandrel Bent, 16-Gauge, 1-5/8" Tubing
- Mild Steel Construction
- 5/16 Machined Flange
- Easy Installation
- High Quality Ceramic Coating
- Includes Gaskets and Brackets

Please Note: This set of Hooker Long Tube Headers will not work on 1971-1973 Mustangs with a Manual Transmission.

*A Custom-Made Intermediate Pipe and Mid-pipe is required when installing these headers
*Will fit Power Steering if you use the slave cylinder lowering bracket.

Upgrading your Mustang’s exhaust system and adding high quality headers is a great way to enhance its performance. That’s why Mustang hobbyists and restoration professionals alike often make headers from Hooker Headers an important part of their renovation projects. For more than half a century, Hooker Headers has been manufacturing top quality headers and related products that are widely considered among the best in the industry.

Purchase a new set of Hooker Ceramic Coated Competition Long Tube Headers 6901-1HKR for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang with a 289 or 302 Engine or 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang with a 351W Engine from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Mustang Parts  

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
Hooker Long Tube Headers Competition Ceramic Coated 289/302 1965-1973/351W 1967-1973 is rated 2.0 out of 5 by 1.
Rated 2 out of 5 by from poor fit this product did NOT fit my 1969 351w Mach 1. They hit the frame rail on the drivers side down low and could not bolt to the head. Went directly to Hooker. They were a big help. Had me ship them back. They confirmed they were not bent correctly. Sent me a new set. They were better. They did bolt up but still so close to the frame that I would say they probably touch. But they did bolt up. Look great. Performance is worse than stock. But have not tuned the carb to the new headers. So after I do I expect great performance.
Date published: 2017-09-27
  • y_2017, m_10, d_15, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_EXHD52, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 8.08ms
  • REVIEWS, PRODUCT

Product Questions

Will these fit a 67 mustang coupe with a 302 and 4 speed?

Asked by: Mattgg93
Yes.
Answered by: rk cjpp
Date published: 2017-09-26

Will these headers fit a 1966 Mustang coupe with a1995 5.0 engine and top loader four speed manual trans?  The car has no shock towers since it has a Mustang 2 rack and pinion steering set up.  Also has power steering and throwout bearing hydraulic clutch

Asked by: RWG55
You would have to use headers that match the ports on your heads.
Answered by: rk cjpp
Date published: 2017-06-14

Will these fit a '67 289 ci with a top loader manual transmission?

Asked by: Jason61
Yes they should.
Answered by: rk cjpp
Date published: 2017-04-17

Will these fit my 69 mustang fastback 351w converted to an automatic AOD transmission?

Asked by: Jcordova
They should fit.
Answered by: rk cjpp
Date published: 2017-01-05

Will these fit a 1970 Mustang 351w base hard top ? 

Asked by: Junior1970
Yes.
Answered by: CJPP Dave
Date published: 2016-10-20

will these fit a 65 falcon-stock suspension?

Asked by: jricky
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Answered by: CJPP Dave
Date published: 2016-10-11

Will these fit a 69 mustang 302 with a auto trans?

Asked by: Junior69
Yes they will.
Answered by: rk cjpp
Date published: 2016-09-30

SHOULD IT FIT FOR 1966 FORD MUSTANG V8 289

Asked by: irias7707
Yes.
Answered by: CJPP Dave
Date published: 2016-09-20
  • y_2017, m_10, d_15, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_20
  • loc_en_US, sid_EXHD52, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 8.22ms
  • QUESTIONS, PRODUCT

You Might Also Like