Horn Original Style Pair 1965-1966

CJ's Part Number:
HORN1
Horn Original Style Pair 1965-1966 is rated 3.7 out of 5 by 11.
  • y_2019, m_10, d_16, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_HORN1, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 157.74ms
  • REVIEWS, PRODUCT
MSRP $64.98
$63.99
You save $0.99

Pair of Original Style Horns for all 1965-1966 Mustangs.

This pair of original style horns come with correct mounting brackets and tuned high and low frequency horns. These horns are made out of cast metal and then painted black for a fine quality finish.

The high note horn is marked "HI" and the low note horn is marked "LO". The high note horn is located on the passenger side and the low note horn can be found on the driver side.

*We have found that some 1966 Mustangs had the horn brackets that were used in 1967 and 1968. If your 1966 horn brackets have a locating tab you will want to go with the 1967/1968 horns(HORN2) which have the correct brackets for your 1966 Mustang.

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Vehicle Fitment

This product will fit the following Mustang years:

Rated 3 out of 5 by from I bought a the pair of horns They had the low horn on stock and it took 5 -6 weeks for the high horn. After waiting for the high horn this is what I got. Works great but looks like poop
Date published: 2016-07-28
Rated 5 out of 5 by from OK for 64 1/2 Mustang too Although they're not listed as 64 1/2 models, they work just fine in my 64 1/2 with a generator. I also replaced the relay, steering wheel contact and retainer ring. A previous restoration had removed or covered the original frame mounting. But, it was easy enough to find a good spot and drill a hole for a self-threading bolt. Very nice tone and plenty loud!
Date published: 2017-07-07
Rated 1 out of 5 by from Horn ??? I ordered a set and can’t get them to work. I ordered an additional one to test it and can’t get that to work either. What’s the voltage on this because even if I wire it directly to the battery it doesn’t work. I wire brushed the paint off to get good contact for the negative and ran the positive to the battery and got nothing.
Date published: 2019-04-01
Rated 4 out of 5 by from acceptable reproduction The horns were easy to install, and sounded great. The gauge of steel was not as heavy as the original. Once installed the passenger horn didn't point in the same direction as the original, and the mount does not allow the horns to be adjusted.
Date published: 2015-03-26
Rated 4 out of 5 by from Great fit Great fit and look on the horn set, but they did come with multiple touched up scratch marks all over them. They could use a total repaint if it bothers you too much so the paint match's, but other then that, they look and fit fine.
Date published: 2015-02-15
Rated 4 out of 5 by from Great price but strange paint Bought a set of horns. We received them quickly and they work fine but one had messed up paint. I looked liked a child painted the one horn with black paint. Wasn't a big deal to repaint it. Not CJ Pony's fault but suppliers.
Date published: 2015-10-30
Rated 5 out of 5 by from Honk, Honk Purchased these to replace the sick sounding originals, still in the car. These work wonderfully. They give the classic two tone sound, that is reminiscent of the era when horns went honk, instead of beep, beep!
Date published: 2018-09-09
Rated 1 out of 5 by from Poorly designed reproduction I purchased two horns for my 1966 Mustang. For the most part, the car is original since I was the original buyer. When the left horn failed I was hopeful of finding a pair of replacement horns that replicated the original. Because of patent and licensing restrictions, as well as quality control and manufacturing costs, the horns I ordered are a poor match for the original. The original horn bracket is flat on top with a flange that fits into an index hole to align the horn's bowl in an outward facing direction. The reproduction has a spiked bracket and no flange; and the bracket is permanently afixed to the back of the horn so that the bowl faces down, not out. A small adjustment can be made by moving the horn assembly, but no where near the original placement can be achieved - which is very noticeable to anyone familiar with the '66 Mustang and dedicated to preserving it's original appearance. In addition, you just have to pick up the original horn and the reproduction horn to sense the difference in quality construction between the two. I am hopeful that I can return for a full refund.
Date published: 2018-02-28
  • y_2019, m_10, d_16, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_HORN1, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.22ms
  • REVIEWS, PRODUCT
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 110.32ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;