Hub Grease Cap Front V8 1965-1973

CJ's Part Number:
HW1167
Hub Grease Cap Front V8 1965-1973 is rated 2.5 out of 5 by 4.
  • y_2019, m_10, d_15, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_HW1167, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 136.85ms
  • REVIEWS, PRODUCT

Highlights

  • OEM-Style Reproduction
  • Direct-Fit Replacement
  • Steel Construction
  • Fits 1965-1973 Mustang
$5.99

Front Hub Grease Cap for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a V8 Engine.

If you're replacing or repairing a front hub on your 1965-1973 Mustang with a V8 engine, then you should definitely check out this Front Hub Grease Cap. This cap will contain all of the necessary grease inside the hub without letting any harmful debris in. If any dirt, dust, grime, water or other debris gets into your wheel bearings, it can cause a lot of potentially expensive problems. Nip that in the bud right off the bat and make sure you install this Front Hub Grease Cap.

*Some force may be required to fit this Front Hub Grease Cap onto the drum.

Please Note: This cap will NOT fit on 1969 Boss Mustangs.

No matter what year Mustang you have, CJ Pony Parts has the braking components that you need, whether you're upgrading the performance or replacing components that have worn from age and use.

Order a Front Hub Grease Cap for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang with a V8 Engine from CJ Pony Parts today!

Vehicle Fitment

This product will fit the following Mustang years:

Rated 3 out of 5 by from Not a good fit The cap was made from heavy gauge metal. The dimensions were off. I had to taper the end to get the cap started into the hub. There were no springs inside the grease cap like the original part has.
Date published: 2017-08-15
Rated 1 out of 5 by from 73 MUSTANG FRONT GREASE CAPS NOT PLEASED,,,,CHEAP,,,,,REALLY THIN,,,,,WAS NOT ABLE TO INSTALL,,,,TOO THIN,,,,A LITTLE "OFF" WITH FIT,,,,,HAMMERED MY OLD ONES BACK ON,,,,SUPERIOR TO YOUR REPLACEMENT,,,,VERY DISCOURAGED.
Date published: 2018-08-04
Rated 4 out of 5 by from Takes a little modification. Like all the other reviews say, they are made a little big. Spent a little time sanding/polishing and they fit well.
Date published: 2018-08-24
Rated 2 out of 5 by from Doesn't fit Well it does fit in the grooves but will not fit even all the way around. It bottoms out on the spindle on one side.
Date published: 2017-11-03
  • y_2019, m_10, d_15, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_HW1167, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.22ms
  • REVIEWS, PRODUCT

do you carry one that fits the 6 cylinder

Asked by: steve in spokane
Here is the link. https://www.cjponyparts.com/hub-grease-cap-front-6-cyl-1965-1966/p/HW1165/
Answered by: rk cjpp
Date published: 2019-03-12

will this fit the disk brake hub with the ssbc A120-20 conversion kit?

Asked by: skat
It might, we have never test fitted it on that brake kit.
Answered by: rk cjpp
Date published: 2016-10-28
  • y_2019, m_10, d_15, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_HW1167, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 181.32ms
  • QUESTIONS, PRODUCT