Jammock Truck Bed Hammock

Jammock:
14325
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 107.55ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Highlights

  • Supports Up To 400Lbs
  • 56" X 56" In Size
  • Can Be Mounted On 60"X90" Bed
  • Bed Must Be 20" Deep
MSRP $329.99
$296.99
You save 10%

Jammock Truck Bed Hammock.

Whether you are out on the trail with your truck, or tailgating at a football game, having a place to relax is key. This Jammock Truck Bed Hammock from CJ Pony Parts can be setup in minutes and ready for ultimate relaxation! The Truck Bed Hammock (14325) is a durable, functional and comfortable addition to your truck. It is constructed from polyester webbing and includes O-rings, NRS heavy-duty cam buckles, and wire J-hooks. This truck bed hammock is simple to install and can be used in many ways such as a cargo net, a Tonneau cover, and of course as a hammock.

Size:
- 56" x 56" (79" diagonally-- a grown adult, provided he is under 7 feet tall, will fit just fine)
- Attachment straps will allow it to fit almost all truck beds, tested on truck bed 60" x 90" with no issues.
- Bed must be at least 20" deep

Safety:
- U.S. Consumer Product Safety Commission (CPSC) compliant (i.e.: safe for children, cargo net gap size is under 3.5" x 3.5")
- Working load limit of 400 lbs.

Webbing:
- 6,000 lbs, 2" polyester
- 4,500 lbs, 1" polyester webbing

Hardware:
- 10,000 lbs, 2" O-rings
- (4) 2,000 lbs, 1" NRS Heavy-Duty Cam Buckles
- (4) 3,300 lbs, 1" wire J-Hooks (vinyl coated)

Truck bed requirements:
- Four stake pockets to accept the 1" wire J-hooks (wire J-hooks require 5/8" x 5/16" profile to fit) or drill your own holes
- Stake pockets must be a minimum of 60" from each other (maximum of 72" from each other), see picture below
- Truck bed should be at least 18" deep, from top of the stake pocket to the floor (to prevent your butt from hitting the floor)
- Installs in about one minute

Other Uses:
-BOATS
-Cargo Net
-Tonneau Cover
-Tie Down
-Hammock off the vehicle

Order this Jammock 14325 Truck Bed Hammock from CJ Pony Parts today!

Installation Videos

Vehicle Fitment

This product will fit the following F-150 years:

This product will fit the following Ram years:

This product will fit the following Silverado years:

  • 2007,
  • 2008,
  • 2009,
  • 2010,
  • 2011,
  • 2012,
  • 2013,
  • 2014,
  • 2015,
  • 2016,
  • 2017,
  • 2018,

This product will fit the following Tacoma years:

This product will fit the following Tundra years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 17.66ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

CAN YOU USE THIS WITH A 2010 TACOMA WITH A CAP ON THE BED?

Asked by: CTATE442
Truck bed requirements: - Four stake pockets to accept the 1" wire J-hooks (wire J-hooks require 5/8" x 5/16" profile to fit) or drill your own holes - Stake pockets must be a minimum of 60" from each other (maximum of 72" from each other), see picture below - Truck bed should be at least 18" deep, from top of the stake pocket to the floor (to prevent your butt from hitting the floor) - Installs in about one minute
Answered by: rk cjpp
Date published: 2018-09-26
  • y_2019, m_11, d_16, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.2
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_14325, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 145.15ms
  • QUESTIONS, PRODUCT