JBA Long Tube Headers 1-3/4" Stainless Steel Ceramic Coated For Use With Borgeson Power Steering Conversion Kit Mustang 260/289/302 1965-1973

100% of 100


  • 1-3/4" Primary Tubes
  • 3" Collector
  • Stainless Steel Construction
  • Silver Ceramic Coating
MSRP $938.48
You save 15%

JBA Ceramic Coated Stainless Steel 1-3/4" Long Tube Headers for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a 260, 289, or 302 Engine and a Borgeson Power Steering Conversion Kit.

After the installation of a Borgeson Power Steering Conversion Kit, you may run into header clearance issues. Not to worry, JBA's long tube headers are created specifically to clear the Borgeson setup while providing a fantastic boost in performance and sound.

This set of headers will fit your 1965-1973 Mustang equipped with a Ford 260, 289, or 302 Engine.

- Stainless Steel Construction
- Silver Ceramic Coating
- 3/8" Thick CNC Laser Cut Flanges
- 1-3/4" Primary Tubes
- 3" JBA Firecone Style Collector
- Includes All Necessary Hardware and Gaskets

The stainless steel construction already resists rust, but JBA coats the headers with silver ceramic coating to help contain heat and provide great aesthetics. With the ceramic coating, you don't have to worry about the finish flaking off or discolored metal.

All the required hardware is included as well as high quality gaskets so you don't need to to make any trips to the local automotive parts store.

JBA's long tube headers have 3/8" thick flanges which resist warping due to the heat. The flanges are CNC laser cut to ensure a perfectly flat surface so your cylinder heads seal perfectly against the headers. Large 1-3/4" diameter mandrel bent steel tubes increase exhaust gas flow for a great improvement in power. JBA's patented 3" Firecone collector merges individual cylinder exhaust gases without interrupting flow and velocity.

As with all JBA performance headers, you'll witness increased horsepower and torque throughout the entire RPM range. Improved throttle response will make your Mustang a joy to drive. The large diameter long tube headers will help the engine breath and increase fuel economy due to increased efficiency. To top it all off, these headers will look great under the hood of your 1965-1973 Mustang.

California Residents: Proposition 65 Warning

Only for use on pre-pollution controlled vehicles: This product can be used on vehicles that were manufactured before emissions control regulations were imposed. Pre-pollution vehicles are defined as:

  • 1965 and older U.S. manufactured California certified vehicles
  • 1967 and older U.S. manufactured federally certified vehicles

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.