JKS Manufacturing Control Arm Correction Bracket Front Pair Jeep Wrangler JK 2007-2018
Pair of JKS Manufacturing Front Control Arm Correction Brackets for all 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.
If the ride comfort of your 2007-2018 Jeep JK Wrangler is something that needs improvement, then you’ll be interested in this Pair of JKS Manufacturing (6200) Front Control Arm Correction Brackets.
Features & Benefits:
- Corrects caster for 2” to 4-1/2” lifts
- Improves front drive shaft CV joint angles
- Manufactured from durable 7GA steel
- Installs inside factory upper and lower control arm mounts
- Installation instructions included
- 2012-2018 JK Models will see an increase in clearance
A reduced control arm angle permits the front suspension to go over bumps and grooves more easily and smoothly. The force from movement will be aimed to the coil springs and shocks, where they are absorbed and controlled, instead of the control arms taking the full force and creating a rougher ride. The caster for 2” to 4-1/2” lifts will be corrected. Front drive shaft CV joint operating angles will be improved through full wheel travel. The brackets are constructed from a durable, heavy-duty 7GA steel and are completely boxed and welded for the best strength. These brackets will be installed in the factory upper and lower control arm mounts by using the factory hardware. These are compatible with the JKS adjustable control arms for superior performance. The mounting holes are strategically placed for better caster, which can be found in the installation instructions.
* Requires 2" of front bump stop extension for adequate clearance at full suspension compression. JKS 2" bump stop extension are available separately (#1120)
* Can be used in conjunction with JKS or other aftermarket control arms that can be set to factory length.
* Designed for use with 2"+ lift. Ideal lift range is 2"-4.5" but can be used up to 6".
* Do not combine with any other drop/relocation brackets.
Purchase this Pair of JKS Manufacturing (6200) Front Control Arm Correction Brackets for your 2007-2018 Jeep JK Wrangler from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Novice skill is required for this installation.