JKS Manufacturing Control Arm Correction Bracket Front Pair Jeep Wrangler JL 2018-2022/Gladiator 2020-2022

JKS Manufacturing:
100% of 100


  • Durable 7GA Steel Construction
  • Reduced Control Arm Angle
  • Improved Operating Angles
  • Includes Install Instructions
MSRP $230.99
You save 10%

Pair of JKS Manufacturing Front Control Arm Correction Brackets for 2018, 2019, 2020, 2021, and 2022 Jeep JL Wranglers and for 2020, 2021, and 2022 Jeep Gladiators.

If the ride comfort of your 2018-2022 Jeep JL Wrangler or 2020-2022 Jeep Gladiator is an aspect of your rig that could be dramatically improved, then you’ll want to look into ordering this Pair of JKS Manufacturing (6201) Front Control Arm Correction Brackets.

Features and Benefits:
- Corrects caster for 2” to 4-1/2” lifts
- Improves front drive shaft CV joint angles
- Manufactured from durable 7GA steel
- Installs inside factory upper and lower control arm mounts
- Installation instructions included

A reduced control arm angle allows the front suspension to move over bumps and holes more effectively and smoothly. The force from movement will be transferred to the coil springs and shocks, where they are absorbed and contained, instead of the control arms taking the full force and creating a rougher ride. The caster for 2” to 4-1/2” lifts will be corrected. Front drive shaft CV joint operating angles will be improved through full wheel travel. The brackets are manufactured from a durable, heavy-duty 7GA steel and are completely boxed and welded for ultimate strength. These brackets will be installed in the factory upper and lower control arm mounts by using the factory hardware. These are compatible with the JKS adjustable control arms for superior performance. The mounting holes are strategically placed for better caster, which can be found in the installation instructions.

* Requires 2" of front bump stop extension for adequate clearance at full suspension compression. JKS 2" bump stop extension are available separately (#1120)
* Can be used in conjunction with JKS or other aftermarket control arms that can be set to factory length.
* Designed for use with 2"+ lift. Ideal lift range is 2"-4.5" but can be used up to 6".
* Do not combine with any other drop/relocation brackets.

California Residents: Proposition 65 Warning

Installation Difficulty


Novice skill is required for this installation.

Vehicle Fitment

This product will fit the following Gladiator years:

  • 2020,
  • 2021,
  • 2022,

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account