Need more clearance for larger tires on your 2018-2020 Jeep JL Wrangler but you don’t want to sacrifice on-road comfort and off-road handling? Then be sure to pick up this JKS Manufacturing 3-1/2" Suspension Lift Kit with FOX 2.0 Shocks and Heavy Duty Coils that’s now available from CJ Pony Parts!
Features & Benefits:
- Clearance for 35" Tires
- Engineered to Maintain On-Road Comfort and Handling While Improving Off-Road Capability
- Specially Tuned Sets of Dual Rate Coil Springs Provide Best Performance in Any Driving Situation
- Heavy Duty Coil Springs Specially Designed for JLs with Winch Bumpers, Racks and Other Gear
- HD Coils Net about 1/2" More Lift than Standard Springs and Designed for Extra Load Capacity
- Includes FOX 2.0 Adventure Series Monotube Shocks Designed to Improve Capability When You Hit the Trail
- Includes Strong JKS Adjustable Track Bar: Formed from 1.5" x .375" Wall DOM Tubing to Mimic Factory Bends for Front Axle Clearance and Uses Threaded End with Jam Nut and Durometer-Specific Bushings at Both Ends to Properly Position Front Axle
- Includes Set of Lower Control Arm Caster Cam Locks to Correct Caster for Improved Driveability
- Sway Bar Disconnecting Links Can be Easily Removed by Pulling Clips and Swinging Links Up Out of the Way for Increased Articulation
- Links Maintain Quiet On-Road Comfort and Quiet Operation Using Adjustable Design with Spherical Poly-Flex Ball Bushings Capable of High Misalignment
- Frame-Mounted Retention Bracket Secures Sway Bar Up Out of the Way When You’re on the Trail
- Includes Pair of Billet Aluminum Bump Stop Extensions to Control Suspension Up Travel
- Includes Extended Length Rear Sway Bar Links to Correct Sway Bar Operating Angle
- Rear Axle Repositioned Using Heavy Duty Rear Track Bar Bracket Designed to Key Off Factory Bracket for More Strength While Centering Rear Axle Under JL
- Rear Bump Stop Extensions Included
- Made in the USA
This JKS Manufacturing (JSPEC120K) 3-1/2" Suspension Lift Kit with FOX 2.0 Shocks and Heavy Duty Coils is designed to maintain on-road comfort and handling while improving off-road capability! You’ll get heavy duty coil springs that give you about 1/2" more lift than standard springs and are designed for extra load capacity. You’ll also get FOX 2.0 Adventure Series monotube shocks, an adjustable track bar, a set of lower control arm caster cam locks and more.
Are you looking to increase your JK Jeep Wrangler’s performance capabilities on the trail? Could your 4x4 use a more aggressive stance? If you can relate to either scenario above, it would be wise to browse through CJ’s ever-growing collection of JKS Manufacturing JK Wrangler parts!
Order a JKS Manufacturing (JSPEC120K) 3-1/2" Suspension Lift Kit with FOX 2.0 Shocks and Heavy Duty Coils for your 2018-2020 4-Door Jeep JL Wrangler from CJ Pony Parts today!