JLT Performance Oil Separator 3.0 Black Anodized Passenger Side Kit 2.7L /3.5L /5.0L F-150 2011-2019 /F-150 Raptor 2017-2019

JLT Performance:
3016P-B
JLT Performance Oil Separator 3.0 Black Anodized Passenger Side Kit 2.7L /3.5L /5.0L F-150 2011-2019 /F-150 Raptor 2017-2019 is rated 4.2 out of 5 by 15.
  • y_2019, m_10, d_15, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_US, sid_OILSEP64, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 4.01ms
  • REVIEWS, PRODUCT

Highlights

  • Black Anodized Finish
  • Multi Stage Filter System
  • Billet Aluminum Construction
  • Holds 3Oz Of Fluid
$139.00

JLT Performance Black Anodized Passenger Side 3.0 Oil Separator Kit for 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 and 2019 F-150s with a 2.7L EcoBoost, 3.5L EcoBoost or 5.0L Engine and 2017, 2018 and 2019 F-150 Raptors.

If you're looking for a way to boost the power in your 2011-2019 F-150 or 2017-2019 F-150 Raptor, than you should definitely consider adding this premium JLT Performance 3016P-B Black Anodized Passenger Side 3.0 Oil Separator Kit, now available from CJ Pony Parts!

JLT Performance Oil Separator Features and Benefits:
- Holds 3oz of Fluid
- Billet Aluminum Construction
- Tank Mounts to Battery Tray for Easy Access
- Black Anodized Finish
- Multi Stage Filter System
- Easy Plug and Play Installation
- Helps Enhance Overall Power by Providing Cleaner Air for your Engine's Intake

This premium-quality oil separator 3016P-B from JLT Performance features Billet aluminum construction and a sleek black anodized finish. The 3 oz. container can be easily removed every 5,000 miles to remove any gathered particles collected from the multi-stage filter. JLT designed this direct-fit upgraded separator to be a plug-and-play replacement, meaning there's no special tools or permanent modifications needed and you can get the install done in just a few minutes. Boost your Ford truck's power by cleaning the air into the cold air intake and you'll see immediate performance improvement. Order your new oil separator today from CJ's!

Vehicle Fitment:
- 2011-2019 F-150 5.0L
- 2011-2019 F-150 5.0L with Roush or Whipple supercharger
- 2011-2019 F-150 3.5L EcoBoost
- 2015-2019 F-150 2.7L EcoBoost
- 2017-2019 F-150 Raptor 3.5L EcoBoost

Please Note: This upgraded oil separator is also available in a clear anodized finish (OILSEP65).

Order this JLT Performance 3016P-B Black Anodized Passenger Side 3.0 Oil Separator Kit for your 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 or 2019 F-150 with a 2.7L EcoBoost, 3.5L EcoBoost or 5.0L Engine or 2017, 2018 or 2019 F-150 Raptor today from CJ Pony Parts!

Note: This item is not CARB (California Air Resource Board) exempt and is not legal for sale or use in the state of California.

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Vehicle Fitment

This product will fit the following F-150 years:

Rated 4 out of 5 by from JLT oil seperator Easy install 4-4.5 stars. Only reason production run change , not sure. The catch can and intake hose sitting right on electrical wire harness and connector. Literally the fitting right where wires exit harness, not alot of play. Hope wires won't vibrate. Also the fitting to intake is bent on such away statically it's in way of cover fitting done on stud. So have to reposition that around. Other than that. Straight forward easy install, also always check the canister don't assume it's tight mine about 3 turn loose. Hope product saves an inconviences for me engine wise down the road. Would suggest to buy.
Date published: 2017-10-24
Rated 5 out of 5 by from Easy install Way easy install, looks OEM and should be on an ecoboost engine.
Date published: 2017-04-20
Rated 5 out of 5 by from Great Service Ordered JLT Perfomance Oil Separator for my 3.5L Eccoboost F-150. Product was delivered pronto! Very easy to install as well. Will definitely use CJ Pony Parts Againnin the future.
Date published: 2018-04-26
Rated 5 out of 5 by from Line full of nasty oily liquid Just like all over You-Tube the line from the Crankcase to the inlet manifold was full of this nasty brown oily liquid. The kit took about 10 minutes to install, very easy to complete but I did have to go back to You-tube a couple of times to confirm a few things. A DVD in the kit would be better than the photo copies that were not so good.
Date published: 2017-11-21
Rated 2 out of 5 by from JLT dropped the ball I have had 6 JLT catch cans and this one is what i expected other that the fit. They definitely cheapened out trying to get one kit to fit too many vehicles. Clashes with the wiring harness and the fix is to take the harness off the mount and zip tie it out of the way. Couldn’t believe it. If they would of make a different bracket to mount the catch can 2 inch’s to the right could of left everything where it was. I’m sure it will work just fine just fine but not what I expected out of a JLT product.
Date published: 2018-09-14
Rated 1 out of 5 by from does not fit a 2017 jlt is too lazy to design a new mount for the 2017 i doubt they even care. Spend a little extra money for a product that has the propper r&d i sent mine directly back. Still waiting on my return to be processed a month down the road though.
Date published: 2018-05-10
Rated 5 out of 5 by from Quality product, 3.5 ecoboost The instructions kind of suck the black and white pictures don’t show detail. You do have to trim your engine cover with the 2011-2014 3.5ecoboost. The cover will not fit or lock in on the passenger side if you don’t. had nasty liquid in mine after a easy 25 mile round trip to and around town. Glad I bought it. (I used a hole saw and knife to trim my cover,see pic)
Date published: 2017-12-18
Rated 5 out of 5 by from Simple installation,and it works! After reading several articles and watching YouTube videos on carbon build-up due to venting the crank case back into the intake manifold of a direct injection engine, I decided to give this product a try. It does exactly what it's supposed to do.
Date published: 2018-07-25
  • y_2019, m_10, d_15, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_US, sid_OILSEP64, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 14.63ms
  • REVIEWS, PRODUCT

Will this fit the 2016 5L Shelby F-150?

Asked by: Jordo487
No it will not.
Answered by: rk cjpp
Date published: 2019-01-28

Does this particular oil separator have check valves for the 2018 Raptor with the 3.5L eco boost engine?

Asked by: matpasko12
At this time we do not list this as fitting the 2018 raptor.
Answered by: rk cjpp
Date published: 2018-11-25

Hi this works for lincoln navigator 2015 3.5 ecoboost?

Asked by: Wunx
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Answered by: rk cjpp
Date published: 2018-10-17

Would I have to relocate wires if it's installed on a Gen2 Raptor? I read that some wires maybe in the way and they have to be zip tied to be relocated. Does that apply to the Raptor engine?

Asked by: Anonymous
Yes it would.
Answered by: rk cjpp
Date published: 2018-10-10

Will this work on a 2018 raptor?

Asked by: Nicinc
Yes.
Answered by: rk cjpp
Date published: 2018-09-30

Can this oil separator also fit and work on an 2018 Ford F150 2.7L EB? If ordered, is this the Black or Silver canister? And is this the Black or Silver canister? V/r

Asked by: Ulua78
Sorry we do not list this as fitting your year f-150 with the 2.7.
Answered by: rk cjpp
Date published: 2018-07-05

2018 2.7 does this fit

Asked by: searay
This will only fit the 2010-2017 2.7l f-150.
Answered by: rk cjpp
Date published: 2019-09-28

will this fit 2018 f150 3.5 eb?

Asked by: usarmy88
It doesnt really fit the 2017. you have to relocate a electrical harness, and zip tie it. I am returning mine due to them being too lazy to design a new bracket
Answered by: Co backcountry970
Date published: 2019-07-17
  • y_2019, m_10, d_15, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_en_US, sid_OILSEP64, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 5.06ms
  • QUESTIONS, PRODUCT