JLT Performance Oil Separator 3.0 Clear Anodized Driver Side Kit Cobra/Mach 1 1999-2004

JLT Performance: 3018D-C
CJ's Low Price:
1508371200 67986
Further improve your Mustang with these other awesome parts from JLT Performance!
Earn 139 RPM Points What's this?
JLT Performance Oil Separator 3.0 Clear Anodized Driver Side Kit Cobra/Mach 1 1999-2004
JLT Performance

Product Description

JLT Performance Clear Anodized Driver Side 3.0 Oil Separator Kit for 1999, 2000, 2001, 2002, 2003 and 2004 Cobra and Mach 1 Mustangs.

If you want to maximize the performance of your 1999-2004 Mach 1 or Cobra Mustang, keep your engine clean with this Clear Anodized Driver Side 3.0 Oil Separator Kit from JLT Performance. The kit's multi-stage filtering system collects oil vapors and drops them into a base that is easily emptied. JLT's recently redesigned oil separator holds three ounces of fluid and is made out of billet aluminum. This separator will allow clean air to pass into your pony's intake and even helps keep your gas from getting diluted.

Features and Benefits of the JLT Performance Clear Anodized Driver Side 3.0 Oil Separator Kit (3018D-C):
- Newly redesigned
- Holds 3 oz. of fluid
- Constructed from premium billet aluminum
- Multi-stage filter system
- Easily removed knurled tank base
- O-ring seal prevents leaks
- Clear anodized finish
- Easy to empty
- Simple installation

- 1999-2001 SVT Cobra
- 2003-2004 SVT Cobra
- 2003-2004 Mach 1

The engineers at JLT Performance designed this oil separator to have an OE fit. It features a plug and play installation which allows it to be dropped into your pony's driver side PCV line. The oil separator's new design holds three ounces of oil blow-by as compared to JLT's previous version which could only hold a little over one ounce of fluid.

The multi-stage filtering system is extremely effective. The oil vapors pass through two different filters. They are first collected by a fine mesh stainless steel screen. When the vapors get heavier, they fall down into a second filter. The oil droplets then travel through a 1/2” thick 1/16th” aluminum honeycomb filter.  When they grow into larger droplets, they fall to the bottom of the canister. This prevents the oil vapors from moving into your Mustang's intake system.

The oil separator's knurled tank base simply twists off, making it easy to dispose of the collected oil. The tank should be emptied every 5,000-7,000 miles. JLT also provides an o-ring seal to prevent any leaks from occurring.

JLT Performance makes some of the highest quality Mustang products and ones that produce some of the biggest power gains. If you're looking for some of the best cold air intakes and performance parts for your Mustang, go no further than CJ Pony Parts' selection of parts from JLT.

Purchase JLT Performance's 3018D-C Clear Anodized Driver Side 3.0 Oil Separator Kit for your 1999, 2000, 2001, 2002, 2003 or 2004 Cobra or Mach 1 Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Oil Separators  

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 124.27ms
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

I have a 2004 mach 1 Mustang. I was looking to purchase an oil separator however I am not sure if I need to run an oil separator on the driver or passenger side or both? If I can run only one is there a benefit to either the driver or passenger side?

Asked by: Ryan3625
If you are going to only run one, I recommend using the passenger side. But we strongly recommend using both.
Answered by: CJPP Dave
Date published: 2017-01-30
  • y_2017, m_10, d_17, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_OILSEP56, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 34.8ms

You Might Also Like