JLT Performance Oil Separator Kit 3.0 Clear Anodized Passenger Side Mustang GT 2018-2020
- Clear Anodized Finish
- Multi Stage Filter System
- Billet Aluminum Construction
- Holds 3Oz Of Fluid
JLT Performance Clear Anodized Passenger Side 3.0 Oil Separator Kit for 2018, 2019 and 2020 GT Mustangs.
California Residents: Proposition 65 Warning
Note: This item is not CARB (California Air Resource Board) exempt and is not legal for sale or use in the state of California.
Novice skill is required for this installation.
This is JLT's 3.0 oil separator fitting your 2018 Mustang GT. Now, the oil separator's job is to keep oil vapor from going back to the PCV system, which can go into the intake and, over time, damage your engine. This will hold three ounces of oil and features a multistage filtration system inside.
To drain the separator, simply grab the bottom and unscrew it, and then you can dump it out. And here, you can see the filtration system inside.
The oil separator is going to be one of the easiest installations you're ever going to do to your car. Now, we removed our engine cover so you can see what I'm doing, but you actually don't have to even do that. You can reach underneath it pretty easily. What you're going to do is remove this line, here. These little gray clips, just push, and it'll pop off.
The JLT separator features the factory-style fittings, making for easy installation. Lock that into place there. Same over here, and your installation is finished.
The JLT oil separator could not be easier to install. I mean, literally, this is a less-than-a-minute installation, to be honest with you. It'll be something to be thankful you have. What I suggest is every time you change your oil, check that as well and drain it out.
Like I said, this is a very good idea for your Mustang, very simple to install. You'll be back on the road in no time.