JLT Performance Splash Guard Front/ Rear Set F-150 Raptor 2017-2020

JLT Performance:
JLTSGFR-RAP17
Rating:
95% of 100

Highlights

  • Protects Against Mud & Debris
  • 1/8" Thick Black ABS Plastic
  • Zero Drill Install
  • Made In The USA
$119.00

Set of JLT Performance Front and Rear Splash Guards for 2017, 2018, 2019 and 2020 F-150 Raptors.

JLT understands that your brand-new Ford Raptor may need some extra protection on the road, and that's exactly why they designed this direct-fit set of mud flaps! Each of the four (4) JLT Performance Front and Rear Splash Guards JLTSGFR-RAP17 are manufactured using high-quality ABS plastic so they'll be rugged and durable for years to come. JLT designed these new guards to perfectly match the line of your F-150's fender flares, so they'll have an OEM-style look and feel and won't feel like an aftermarket product after the quick and easy install.

Features and Benefits:
- Quick and simple install requires zero drilling
- Helps protect against mud, dirt and debris
- Constructed using 1/8" thick black ABS plastic
- Perfectly designed to match the line of the front fender flares for an OEM look
- Complete set of four (4) flaps--two for the front and two for the rear

*These splash guards are designed to fit 2017-2020 F-150 Raptors only--will NOT fit First Generation Raptors.

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

The F-150 Raptor is an amazing truck off road, but dirt, gravel, and road debris can really do some serious damage to your paint, so today we're going to be installing a set of these JLT Performance splash guards on our 2017 Raptor.

These are JLT splash guards designed to fit the front and rear of your 2017 to '18 F-150 Raptor. They easily install without any modification and use the factory hardware. They're made of durable eighth-inch-thick ABS so they don't flop around, and they offer maximum tire coverage and protection for your paint.

Okay. We're going to be starting off on the front driver side of this truck. As you can see, these mud flaps are pretty big. It's going to be installing it right here, so what we need to do is remove this screw, this screw, and this one down here.

Grab a seven-millimeter socket. The third screw's a little bit tighter just because the tire. If you're using a deep socket, you might have to turn the wheel. Place your JLT mudflap against the fender flare and reinstall your screws. I'm going to start with the middle screw. I'm not going to tighten it down all the way, just going to get it started and then get all three screws in. Once all three screws are in, you can tighten them down. It's as easy as that. We can now move on to the rear.

Very similar process for the rear. It's going to be installing right here, but there's only two screws for the rear. You would definitely need either a wrench or a short socket to do this screw down here.

Once both are removed, reinstall them with the mudflap. As you can see, up here, there's no screw, so it's a little bit floppy up here, so this kit comes with this U-channel that you're going to use to put around the flap and the flare to pinch them together, just like that. Now it's nice and secure. We can do the same thing to the other side.

Okay. We got our JLT splash guards installed on our 2017 raptor, and they do contour nicely with the factory flare, and they cover the tire a whole lot better than the factory flare did. They will definitely help to protect our paint. Super easy to do this. I'd say give yourself 30 minutes to install all four of them and, before you know it, you'll be heading off road.

We hope you enjoyed this video. To subscribe to our YouTube channel, click the link right here. For more videos like this one, check out this playlist.

Vehicle Fitment

This product will fit the following F-150 years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.