JMS Throttle Enhancer PedalMAX Plug-N-Play Drive-By-Wire F-150 2009-2019/F-150 Raptor 2010-2014/2017-2019

JMS:
PX1114F
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 161.84ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
$289.00

JMS PedalMAX Plug-N-Play Drive-By-Wire Throttle Enhancer for all 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 and 2019 F-150s and 2010, 2011, 2012, 2013, 2014, 2017, 2018 and 2019 F-150 Raptors.

If you’re not getting the throttle response you want out of your 2009-2019 F-150 or 2010-2014 or 2017-2019 F-150 Raptor, you can easily fix it with this JMS PedalMAX Plug-N-Play Drive-By-Wire Throttle Enhancer from CJ Pony Parts! 

Features & Benefits:
- Works on All 2009-2019 F-150s and F-150 Raptors
- Complete Solution for Poor Throttle Response: Dramatically Increases Throttle Response
- Eliminates Slow Throttle Response on Modern Drive-by-Wire Vehicles and Improves Driving Experience
- Considerably Improves Vehicle Acceleration and Virtually Eliminates Turbo Lag on EcoBoost F-150s
- Enhances Low- and Mid-Range Horsepower and Torque
- Helps Eliminate Stalling on Manual Applications
- Uses Plug-and-Play Design: Straightforward and Easy to Install with No Need for OBD-II Programming
- Unplug Factory Connector from Accelerator Pedal and Connect PedalMAX in Between
- Includes Remote Throttle Control Knob to Control Amount of Pedal Enhancement On the Fly
- LEDs Help Visually Monitor Device Status
- Made in the USA 

This JMS (PX1114F) PedalMAX Plug-N-Play Drive-By-Wire Throttle Enhancer works on any 2009-2019 F-150 (Raptors too!) and is a complete solution if you’re experiencing poor throttle response. It gets rid of that slow throttle response and helps improve your driving experience. You’ll see a considerable improvement in your F-150’s acceleration as well as enhanced low- and mid-range horsepower and torque. This throttle enhancer also helps eliminate stalling on manual applications! Installation is easy, and there will be no need for OBD-II programming when you’re done. 

Fitment:
- All 2009-2019 F-150s (including Raptors) 

This Kit Includes:
- PedalMAX Throttle Enhancer
- Plug & Play Wiring Harness
- Remote Throttle Control Knob
- Installation Kit and a Set of Instructions 

Installation Kit Contains:
- (1) Red De-Sensitizing Plug
- (4) Zip Ties
- (1) Mini Screw-Driver 

Tech Tip: This product can easily be stacked with other the JMS devices such as BoostMAX when applicable. 

Order a JMS (PX1114F) PedalMAX Plug-N-Play Drive-By-Wire Throttle Enhancer for your 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 or 2019 F-150 or 2010, 2011, 2012, 2013, 2014, 2017, 2018 or 2019 F-150 Raptor from CJ Pony Parts today!

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Vehicle Fitment

This product will fit the following F-150 years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.66ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Will this work on a 2014 f150 with a 6.2 in it not a raptor

Asked by: Gear_wrench
Yes it will.
Answered by: rk cjpp
Date published: 2019-06-14

will this product work with a super chips programmer?

Asked by: nautinick
Yes it will.
Answered by: rk cjpp
Date published: 2019-03-16

Just had Dyno done. Will this product screw it up?

Asked by: Kenny
If you just had your vehicle custom tuned than you wouldn't want to use this product. If it was just on the dyno to see what hp and torque numbers it has than you can use this.
Answered by: rk cjpp
Date published: 2019-02-06
  • y_2019, m_10, d_19, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_PMAX1, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 147.8ms
  • QUESTIONS, PRODUCT