K&N Replacement Air Filter Drop-In Jeep Wrangler JK 2007-2018

K&N:
33-2364

Highlights

  • Drop-In Air Filter
  • Washable/Reusable Filter
  • 50 State Legal
  • Easy Installation
MSRP $86.99
$55.99
You save 36%

K&N Drop-In Replacement Air Filter for all 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.

Are you looking for a new air filter for your 2007-2018 Jeep JK Wrangler that’s long-lasting and provides excellent filtration? If so, be sure to pick up this K&N Drop-In Replacement Air Filter that’s now available at CJ Pony Parts! 

Features & Benefits:
- Designed to Increase Horsepower and Acceleration While Providing High Air Flow and Excellent Filtration
- Washable, Reusable and Custom-Designed to Fit into Existing Factory Air Box
- Lasts Up to 50,000 Miles Before Cleaning is Required (Depending on Driving Conditions)
- Works on OE Manufacturer Vehicle Electronics
- Emissions-Legal in All 50 States
- Will Not Void Vehicle Warranty
- Easy to Install: Simply Remove Old, Disposable Air Filter 

This K&N (33-2364) Drop-In Replacement Air Filter is designed to increase both horsepower and acceleration while also providing high air flow and excellent filtration! It’s washable and reusable, and you can use it for up to 50,000 miles before you’ll need to clean it. This replacement air filter is emissions-legal in all 50 states and won’t void your warranty. Plus, it’s easy to install! Just remove your old air filter and drop this one into place and that’s it.

Order a K&N (33-2364) Drop-In Replacement Air Filter for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

Today on CJ Off Road, we're going to let our engine breathe a little easier. If the factory air cleaner in your Jeep Wrangler has seen better days, or if you're looking for a performance upgrade, then today we're going to be installing this K&N drop-in air filter fitting your 2007-2018 Jeep JK Wrangler. This K&N filter is designed to increase horsepower and acceleration with no tools required to get it installed. It's washable, reusable, and pre-oiled to give you maximum performance right outside of the box.

It's going to work with all your OE electronics, and only requires a cleaning after 50,000 miles of use. Our 2008 Jeep Wrangler, could use a little bit more power, so let's get to the install. The installation of this air filter is super simple. We've got our hood popped. And all we have to do is remove the few clips around this air box, pull out your old filter, and then reinstall the new K&N filter. There are four clips on the outside of this air box. There's two up here, pull them towards you, and they'll pull off. There's one down here. It's kind of hard to see. And then there's one back here underneath the inlet tube. And the top of the box should just pull right off towards you.

Our factory filter has seen better days. There's a ton of gunk inside here, and I'm really glad we're going to be swapping it out with a new K&N filter. Let's get it installed. Go ahead and grab your new filter, and this little lip is going to stick down when you put it inside here. The upper edge is going to make that seal around the top of the box. It simple slides in, then you reattach the clasps.

With it in, now we can push the top of the air box back into place. Get the clasps back attached. And your installation's complete. And that finishes up the install of the K&N drop-in air filter on our 2008 Wrangler. This isn't necessarily the most fun install, however it is going to give us some more performance and more throttle back to our Wrangler. It doesn't take any tools, and you can find it right here at CJPonyParts.com.

Vehicle Fitment

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.