Lakewood Drag Shock/Strut Kit 90/10 2005-2014

Lakewood: 40517/40305
MSRP: $508.88
CJ's Low Price:
1508284800 22854
Earn 451 RPM Points What's this?
Lakewood Drag Shock/Strut Kit 90/10 2005-2014

Product Description

Lakewood Drag Shock and Strut Kit with 90/10 Drag Struts for all 2005-2014 Mustangs.

Lakewood Industries is the leader in drag race chassis and suspension technology. Using decades of track and laboratory research, Lakewood Industries has developed the most consistent and accurate drag struts and shocks on the market today. Lakewood drag shocks and struts have been precisely tuned for superior weight transfer that remains consistent pass after pass. Additionally, the multistage valving provides more stability and control mid track as well as reduced brake dive at the big end.

Lakewood's drag shocks feature a twin tube body, chrome plated piston rod for long seal life and specially formulated hydraulic oil to reduce foam and fade. The rear 50/50 drag shock significantly reduces wheel hop and is versatile for both street and strip performance.

Lakewood's drag struts feature a twin tube body, chrome plated piston rod for long seal life and specially formulated hydraulic oil to reduce foam and fade. Designed for maximum front to rear weight transfer. The front 90/10 drag strut is valved for maximum performance on the drag strip and is not recommended for use on the street.

Kit Includes:
- Pair of 50/50 Lakewood Drag Shocks
- Pair of 90/10 Lakewood Drag Struts

*Disconnecting the front sway bar is recommended.

Similar Mustang Parts

similar Mustang parts More Struts & Shocks  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 114.27ms
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

Will I need new Strut mounts with these? Caster/camber plates needed for alignment? Thanks.

Asked by: Kjraider
If you are using lowering springs than yes you will need caster/camber plates to get the correct alignment, if not using lowering springs than it is not necessary but would be a good idea.
Answered by: rk cjpp
Date published: 2016-06-27

Do the Lakewood 90/10 drag shock/strut kit work well with the 2013 cobra jet springs m-5300-ra, and can you run a front sway bar?

Asked by: That5ptOH
These would work great with the Cobra Jet Springs that you mentioned. And you could run a front sway bar, but if you are truly trying to get all the benefits out of a setup like that, removing the front sway bar will provide even more weight transfer in regards to drag racing.
Answered by: CJPP Dave
Date published: 2015-11-29
  • y_2017, m_10, d_18, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_LAKK3, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 130.56ms

You Might Also Like