Legendary Wheel Co. GT9 Alloy Wheel 17"x8" Charcoal/Machined 1965-1973

CJ's Part Number:
W1041-V
From
$204.26

Legendary Wheel Co. Charcoal and Machined 17" x 8" GT9 Alloy Wheel for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs.

Bring your Mustang into the 21st century with a new set of wheels that compliments your vintage model and adds some modern flare. This Charcoal and Machined 17" x 8" GT9 Alloy Wheel from Legendary Wheel Co. is specifically designed for all 1965-1973 Mustangs. It can be purchased individually or as a staggered set.

Wheel Information:
Size: 17" x 8"
Lugs: 5 x 4.5"
Finish: Machined with Charcoal Painted Spokes
Backspacing: 4.75"
Weight: 18.5 lbs.
Center Cap: Included

This one-piece cast aluminum wheel (P/N: LW69-70854B) features a machined face and charcoal painted spokes. The design was inspired by wheels from the 1969-1970 GT350 and GT500. It's a combination of the original Torque Thrust and iconic Magnum 500 wheels. The unique spoke pattern will definitely set your car apart on the road and in the showroom. The wheel also features a clear gloss coat for added protection over time against the elements and debris you may encounter on the road.

You can order this wheel individually, as a set of four for your 1969-1973 Mustang or as an aggressive staggered set of four. The 17" x 8" wheel is made for rear fitment only for earlier-model Mustangs. If you order a staggered set, you will receive two 17" x 7" wheels for the front and two 17" x 8" wheels for the back. A staggered set will provide your Mustang with a sportier stance, while the square set will give your pony a classic, high-end look. This wheel is built to fit most 5-lug 1965-1973 Mustangs with the original 5 x 4.5" bolt pattern and 4.75" of backspacing. It will clear most aftermarket brake kits.

*Lug nuts for installation (P/N WHLLN31) are sold separately.
*The square set of wheels comes with four (4) 17"x8" wheels.
*The staggered set of wheels comes with 17”x7” front wheels and 17"x8" rear wheels.
*Legendary Wheel Co. “L” logo Center caps are included with the Legendary Wheel Co. wheels.  Original style center caps with Ford licensed logos are sold separately and require P/N: CCWA1 for installation. Lug nuts are not included, CJ Pony Parts carries the correct lug nuts for installation of Legendary Wheel Co. wheels.

Please Note: This 17”x 8" wheel (LW69-70854B) is intended for rear fitment only in 1965-1968 Mustangs, as wider wheels can rub on the front wheel opening when turning. The square set of 17"x8" wheels are recommended for 1969-1973 Mustangs only.

Tech Tip: Even though these wheels are intended to fit the rear of most 5-lug 1965-1973 Mustangs with the original 5 x 4.5" bolt pattern and 4.75" of backspacing. It is a general rule of thumb, you should always measure and verify clearance before ordering aftermarket wheels, as modifications may, or will be necessary for fitment on your classic Mustang.

Order this Legendary Wheel Co. Charcoal and Machined 17" x 8" GT9 Alloy Wheel for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang from CJ Pony Parts today!

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.